✦ LIBER ✦

Studies on polyester-poly(ethyl acrylate-co-styrene) interpenetrating polymer networks

✍ Scribed by Bibekananda Das; Tanmoy Gangopadhyay; Sudipta Sinha

Publisher: Elsevier Science
Year: 1994
Tongue: English
Weight: 618 KB
Volume: 30
Category: Article
ISSN: 0014-3057
DOI: 10.1016/0014-3057(94)90167-8

No coin nor oath required. For personal study only.

✦ Synopsis

Polyester-poly(ethyl acrylate-co-styrene) interpenetrating polymer networks (IPNs) were prepared by the two step in situ sequential technique. Both semi-and full IPNs were synthesized. Poly(ethyl acrylate-co-styrene) acts as the rubbery phase and polyester as the hard, brittle phase. It was found that with increasing proportion of ethyl acrylate in the IPN, elongation at break (EB), toughness and molecular weight between cross-links (Mc) are higher but tensile strength (TS), modulus, tear strength and density becomes lower. Full IPNs, where both networks are cross-linked, have higher TS, modulus, tear strength, density and hardness but lower EB toughness. Scanning electron microscopy revealed that domain size is primarily dependent on the ethyl acrylate content of the blend and also on the amount of cross-linker. Evidence for cross-linking of unsaturated polyester through styrene bridges in the IPNs was obtained.

📜 SIMILAR VOLUMES

Semi- and fully interpenetrating polymer

Semi- and fully interpenetrating polymer networks based on polyurethane–polyacrylate systems. VI. Polyurethane–poly(methyl acrylate-co-ethyl acrylate) semi-1-interpenetrating polymer networks

✍ D. J. Hourston; Y. Zia 📂 Article 📅 1984 🏛 John Wiley and Sons 🌐 English ⚖ 227 KB 👁 1 views

Dynamic mechanical and longitudinal sonic velocity measurements have been made on a series of semi-1-IPNs in which the network component is a polyurethane and the linear constituent a copolymer of methyl acrylate and ethyl acrylate. Dynamic mechanical analysis reveals phase separation. The shifting

Viscoelastic behavior of interpenetratin

Viscoelastic behavior of interpenetrating polymer networks: Poly(ethyl acrylate)–poly(methyl methacrylate)

✍ L. H. Sperling; H. F. George; Volker Huelck; D. A. Thomas 📂 Article 📅 1970 🏛 John Wiley and Sons 🌐 English ⚖ 393 KB 👁 2 views

Semi- and fully interpenetrating polymer

Semi- and fully interpenetrating polymer networks based on polyurethane-polyacrylate systems. X. Polyurethane-poly(ethyl acrylate) interpenetrating polymer networks

✍ D. J. Hourston; M. G. Huson; J. A. McCluskey 📂 Article 📅 1986 🏛 John Wiley and Sons 🌐 English ⚖ 605 KB

Studies on semi-interpenetrating polymer

Studies on semi-interpenetrating polymer networks from poly(vinyl chloride-co-vinyl acetate) and poly(butyl acrylate)

✍ Annakutty Mathew; P. C. Deb 📂 Article 📅 1992 🏛 John Wiley and Sons 🌐 English ⚖ 386 KB 👁 2 views

Epoxy resin/poly(ethyl acrylate)—interpe

Epoxy resin/poly(ethyl acrylate)—interpenetrating polymer networks: engineering properties and morphology

✍ Bibekananda Das; Debabrata Chakraborty; Asok Hajra 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 764 KB

A~tract--lnterpenetrating polymer networks were prepared by the sequential mode of synthesis using an epoxy resin as the plastomer and poly(ethyl acrylate), PEA, as the elastomer components, respectively. Two types of IPNs; viz. full and semi, were prepared and characterized by measurements of tensi

Effect of crosslinker, buffer, and blend

Effect of crosslinker, buffer, and blending on damping properties of poly(styrene-acrylonitrile)/poly(ethyl acrylate- n-butyl acrylate) latex interpenetrating polymer networks

✍ Shucai Li; Wei Zeng 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 97 KB 👁 2 views