✦ LIBER ✦

Studies on cure behaviors, dielectric characteristics and mechanical properties of DGEBA/poly(ethylene terephthalate) blends

✍ Scribed by Soo-Jin Park

Book ID: 105736963
Publisher: The Polymer Society of Korea
Year: 2009
Tongue: English
Weight: 577 KB
Volume: 17
Category: Article
ISSN: 1598-5032
DOI: 10.1007/bf03218913

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Phase behavior and mechanical properties

Phase behavior and mechanical properties of injection molded poly(ethylene terephthalate)/polyarylate blends

✍ J. M. Martínez; J. I. Eguiazábal; J. Nazábal 📂 Article 📅 1992 🏛 John Wiley and Sons 🌐 English ⚖ 742 KB

Effects of mixing time on phase structur

Effects of mixing time on phase structure and mechanical properties of poly(ethylene terephthalate)/ polycarbonate blends

✍ M. García; J. I. Eguiazábal; J. Nazábal 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 244 KB 👁 2 views

## Abstract The effects of interchange reactions on the solid‐state structure and mechanical properties of a 70/30 poly(ethylene terephthalate) (PET)/bisphenol A polycarbonate (PC) blend were studied. Increasing reaction levels were obtained by means of lower screw speeds in the extruder. The progr

Structural and mechanical studies of a b

Structural and mechanical studies of a blend of poly(butylene terephthalate) and poly(ether ester) based on poly(butylene terephthalate) and poly(ethylene glycol)

✍ A.A. Apostolov; S. Fakirov; B. Sezen; I. Bahar; A. Kloczkowski 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 744 KB

Influence of Reactive Compatibilizer on

Influence of Reactive Compatibilizer on the Morphology, Rheological, and Mechanical Properties of Recycled Poly(Ethylene Terephthalate)/Polyamide 6 Blends

✍ Lin, Xintu; Qian, Qingrong; Xiao, Liren; Chen, Qinghua; Huang, Qiaoling; Zhang, 📂 Article 📅 2014 🏛 Taylor and Francis Group 🌐 English ⚖ 454 KB

The Effect of Transreactions on the Stru

The Effect of Transreactions on the Structure and Dynamic Mechanical Properties of 1:1 Poly(ethylene terephthalate)/Poly(ethylene 2,6-naphthalate) Blends Produced by Cryogenic Mechanical Alloying

✍ João F. Mano; Zlatan Denchev; Aurora Nogales; Marta Bruix; Tiberio A. Ezquerra 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 303 KB

## Abstract Cryogenically alloyed poly(ethylene terephthalate) (PET)/poly(ethylene naphthalene 2,6‐dicarboxylate) (PEN) blends (1:1 w/w) were subjected to melt pressing at 300 °C for various times. The binary polymer systems so obtained were studied by means of atomic force microscopy (AFM), dynami

Effects of the blend ratio and crosslink

Effects of the blend ratio and crosslinking systems on the curing behavior, morphology, and mechanical properties of styrene–butadiene rubber/poly(ethylene-co-vinyl acetate) blends

✍ C. K. Radhakrishnan; A. Sujith; G. Unnikrishnan; Sabu Thomas 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 668 KB

## Abstract Blends of styrene–butadiene rubber (SBR) and poly(ethylene‐__co__‐vinyl acetate) (EVA) with different ratios were prepared with a two‐roll mixing mill and were vulcanized by three different crosslinking systems, namely, sulfur (S), dicumyl peroxide, and a mixture consisting of S and per