Studies about a sulphate resistant cement. Influence of admixtures
✍ Scribed by M.T. Blanco; S. García; S. Giménez; A. Palomo; F. Puertas; T. Vázquez
- Publisher
- Elsevier Science
- Year
- 1994
- Tongue
- English
- Weight
- 377 KB
- Volume
- 24
- Category
- Article
- ISSN
- 0008-8846
No coin nor oath required. For personal study only.
✦ Synopsis
Starting from an industrial cement obtained by milling together a new low energy clinker and gypsum, two blended cements containing 20% wt of fly ashes and 10% wt of limestone respectively, have been prepared. The behaviour of these three cements in Na2SO 4 dissolution and sea water has been studied. The method used for testing the specimens has been the Koch-Steinneger one. As a consequence of the study it can be said that the three cements keep a good behaviour in all the aggressive media although the strengths are lower (independently of the age of the specimens) in Na2SO 4 and sea water than in distilled water. Also, the composition of the hydrated pastes conserved in the aggressive liquids for different periods of time has been studied. The evolution of the content of Ca(OH)2 , gypsum and Mg(OH)2 in the pastes as well as the variations observed in the morphology of C-S-H gel along the time and in function of the aggressive medium, seem to keep a good correlation with the strengths evolution. Finally it has been concluded that those cements prepared with the new low energy cement have such a composition that makes them to be resistant to the sulphate attack.
📜 SIMILAR VOLUMES
The paper presents results of an investigation on the effect of initial curing conditions on the sulphate resistance of concrete made with ordinary portland cement and using pfa, silica fume and ground granulated blast furnace slag for partial replacement of cement. In addition, porosity and pore st
This work demonstrates the great influence that the specific surface of a Portland cement has on its high or low resistance to sulfate ion attack = SIA, by means of the accelerated method ASTM C452. For this purpose, two Portland cements were tested, by this method: A Portland cement PY (3,83% C3A)
Several factors influencing the myoelectric activity of muscles surrounding the knee joint were studied using fine-wire monopolar electrodes. The muscles studied included the vastus lateralis, vastus intermedius, rectus femoris, vastus medialis, gracilis, sartorius, biceps femoris, semimembranosus,