The properties of the anodic oxide films formed on titanium and its implant alloys Ti-5Al-4V and Ti-6Al-4Fe are investigated in this paper. Anodic oxide films were prepared by electrochemical treatment in 3M sulphuric acid solution at 60 V for 1 min, followed by a thermal treatment consisting of hea
Structure and physicochemistry of anodic oxide films on titanium and TA6V alloy
β Scribed by Zwilling, V.; Darque-Ceretti, E.; Boutry-Forveille, A.; David, D.; Perrin, M. Y.; Aucouturier, M.
- Publisher
- John Wiley and Sons
- Year
- 1999
- Tongue
- English
- Weight
- 584 KB
- Volume
- 27
- Category
- Article
- ISSN
- 0142-2421
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
## Abstract An anodic oxide film that formed on titanium with a mixture of Ξ²βglycerophosphate sodium (Ξ²βGP) and calcium acetate was investigated. The anodic oxide had interconnected pores (ca. 1β2 ΞΌm in diameter) and intermediate roughness (0.60β1.50 ΞΌm). In addition, it contained a mixture of amor
Ahatrati-Surface-enhanced Raman spectra of the amorphous film on titanium have been obtained for the first time. The anodic corrosion film at low potentials is identified to be highly disordered TiO, with some Ti,O, also present. The presence of the anatase and rutile modifications of TiO, at high v
Anodic charging curves have been measured on Ti in Na,SO,, NaCl, NaNO,, NaH,P04, NasH PO&, Na,PO\* and NaOH solutions in the cd range 5-35 pAlcme. Formation rates are calculated in the region below Oa evolution. The results indicate the high-field approximation, with linearity between the reciproc
Commercially pure titanium was anodized in an electrolytic solution that was dissolved calcium and phosphorus compounds in water, and an AOFCP (anodic titanium oxide film containing Ca and P) was formed. It was found that sodium P-glycerophosphate (P-GP) and calcium acetate (CA) were suitable for th