𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Stripline dual-mode ring resonators and their application to microwave devices

✍ Scribed by Yabuki, H.; Sagawa, M.; Matsuo, M.; Makimoto, M.

Book ID
114552657
Publisher
IEEE
Year
1996
Tongue
English
Weight
768 KB
Volume
44
Category
Article
ISSN
0018-9480

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Novel dual-mode ring resonators with ver
Novel dual-mode ring resonators with very low sensitivity to substrate thickness
✍ A. Corona-Chávez; C. Gutierrez-Martínez; M. J. Lancaster; A. Torres-Fortiz 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 107 KB

Desclos, Terret, and Toutain were able to reduce the antenna size by 50% with 25 of transverse slits on the patch and without any slits on the ground plane [1]. In our case, we have achieved a 50% reduction in size with good VSWR by introducing only seven pairs of slits on the patch and three slits

CPW-fed dual-mode resonators with double
CPW-fed dual-mode resonators with double-ring and double-square-loop for dual-band applications
✍ Ji-Chyun Liu; Jhih-Wei Wang; Ching-Pin Kuei; Bing-Hao Zeng 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 473 KB

## Abstract The CPW‐fed configurations of dual‐mode double‐ring resonator (DMDRR) and double‐square‐loop (DMDSLR) are introduced to achieve the performance of the dual‐band filters. To obtain lower insertion loss, higher out‐of‐band rejection level, and wider band of DMDRR and DMDSLR filters, using

Optimization of passive microwave device
Optimization of passive microwave devices through geometrical parameterization—Application to the design of a cylindrical dual-mode cavity filter
✍ Alireza Mahanfar; Stéphane Bila; Michel Aubourg; Serge Verdeyme; Christelle Boic 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 399 KB

A new algorithm, based on geometrical parameterization and finite element method is presented for the optimization of microwave devices. Using geometrical parameterization, the field quantities are expressed as a polynomial in design parameters. Automatic differentiation is used for calculation of h