## Abstract The CPW‐fed configurations of dual‐mode ring resonator (DMRR) are introduced to improve the performance of the dual‐mode double ring resonator (DMDRR). To obtain low insertion loss (1.65 dB at TM~110~ mode and 0.91 dB at TM~210~ mode) and high out‐of‐band rejection level (−51.95 dB) and
CPW-fed dual-mode resonators with double-ring and double-square-loop for dual-band applications
✍ Scribed by Ji-Chyun Liu; Jhih-Wei Wang; Ching-Pin Kuei; Bing-Hao Zeng
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- English
- Weight
- 473 KB
- Volume
- 51
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
The CPW‐fed configurations of dual‐mode double‐ring resonator (DMDRR) and double‐square‐loop (DMDSLR) are introduced to achieve the performance of the dual‐band filters. To obtain lower insertion loss, higher out‐of‐band rejection level, and wider band of DMDRR and DMDSLR filters, using two twin‐T couples and dual‐mode perturbations are proposed here. Simulation and measurement results including surface current distributions and frequency responses are presented and discussed. It can be applied to 0.9 and 1.2 GHz dual‐band systems. © 2009 Wiley Periodicals, Inc. Microwave Opt Technol Lett 51: 2010–2015, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24574
📜 SIMILAR VOLUMES
## Abstract A novel design of a dual‐mode resonator with double‐ring structure for a band‐pass filter is presented in this paper. Voltage/current couplings between the two rings are proposed based on a mode chart. Because each ring exhibits dual‐mode responses, they determine the range of operation
## Abstract An improved filter design of a dual‐mode double‐ring resonator with radial stub for ultra‐wideband (UWB) applications is presented in this paper. Based on the double‐ring resonator and adjusted voltage/current couplings, two radial stubs are added to the outer ring in order to construct
## Abstract Novel inductive Ω‐shaped perturbations for dual‐mode ring resonators (DMRR) to design dual‐band band‐pass filter with size reduction are presented in this article. Both inductive Ω‐shaped perturbations in DMRR and DMDRR (Dual‐Mode Double Ring Resonator) are studied to improve the perfor
## Abstract The cascaded dual‐mode square‐loop resonator (DMSLR) with Hilbert‐curve perturbation is introduced to design wide band‐pass filter in this article. To obtain low insertion loss (__−__0.85 dB), high out‐of‐band rejection level (__−__51.82 dB), and wider band (BW 62.3%) responses, using H