✦ LIBER ✦

STRESS-INTENSITY FACTORS FOR LONGITUDINAL SHEAR CRACKS

✍ Scribed by SIH, G. C.

Book ID: 120945940
Publisher: American Institute of Aeronautics and Astronautics
Year: 1963
Tongue: English
Weight: 306 KB
Volume: 1
Category: Article
ISSN: 0001-1452
DOI: 10.2514/3.2072

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Stress intensity factors for some bodies

Stress intensity factors for some bodies with cracks in the case of longitudinal shear

✍ I. M. Nesatyi 📂 Article 📅 1986 🏛 Springer 🌐 English ⚖ 298 KB

Approximate formulas for the stress inte

Approximate formulas for the stress intensity factors at the tip of a crack under longitudinal shear stress

✍ V.E. Sadykhov 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 406 KB

Dynamic stress intensity factors at the

Dynamic stress intensity factors at the ends of two collinear longitudinal shear cracks

✍ N. M. Borodachev; V. A. Kol'tsov 📂 Article 📅 1982 🏛 Springer 🌐 English ⚖ 322 KB

Stress intensity factors for twist crack

Stress intensity factors for twist cracks

✍ L. P. Pook; D. G. Crawford 📂 Article 📅 1990 🏛 Springer Netherlands 🌐 English ⚖ 914 KB

Stress Intensity Factors for slender sur

Stress Intensity Factors for slender surface cracks

✍ Dipl.-Ing. W. Huget; Dipl.-Ing. K. Esser; Dr.-Ing. L. Grüter 📂 Article 📅 1984 🏛 John Wiley and Sons 🌐 English ⚖ 323 KB

A calculation procedure for plates with semi-elliptical surface cracks under tension and bending with aspect ratios of d c 5 0.2 and arbitrary relative crack depths d t is presented. For the computation an improved line spring model is used. K,-values are calculated along the crack contour. For the

Stress intensity factors for nozzle corn

Stress intensity factors for nozzle corner cracks

✍ C. RUIZ 📂 Article 📅 1973 🏛 John Wiley and Sons 🌐 English ⚖ 380 KB