✦ LIBER ✦

Stress analysis of implant-supported partial prostheses in anisotropic mandibular bone: in-line versus offset placements of implants

✍ Scribed by H.-L. HUANG; C.-L. LIN; C.-C. KO; C.-H. CHANG; J.-T. HSU; J.-S. HUANG

Book ID: 108881583
Publisher: John Wiley and Sons
Year: 2006
Tongue: English
Weight: 315 KB
Volume: 33
Category: Article
ISSN: 0305-182X
DOI: 10.1111/j.1365-2842.2005.01598.x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Finite element analysis of the influence

Finite element analysis of the influence of the offset placement of an implant-supported prosthesis on bone stress distribution

✍ E. Anitua; G. Orive 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 936 KB

## Abstract The aim of this study was to evaluate the influence of the straight alignment versus distal offset placement of an implant‐supported prosthesis (using implants with different diameters: 4 mm, 4.5 mm, and 5 mm) on bone stress distribution. 3D finite element models of a straight configura

Comparative evaluation of the effect of

Comparative evaluation of the effect of diameter, length and number of implants supporting three-unit fixed partial prostheses on stress distribution in the bone

✍ Haldun İplikçioğlu; Kıvanç Akça 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 294 KB

Influence of Cusp Inclination on Stress

Influence of Cusp Inclination on Stress Distribution in Implant-Supported Prostheses. A Three-Dimensional Finite Element Analysis

✍ Rosse Mary Falcón-Antenucci; Eduardo Piza Pellizzer; Paulo Sergio Perri De Carva 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 524 KB

A digital image correlation analysis on

A digital image correlation analysis on the influence of crown material in implant-supported prostheses on bone strain distribution

✍ Rodrigo Tiossi; Lianshan Lin; Heather Joan Conrad; Renata C.S. Rodrigues; Young 📂 Article 📅 2012 🏛 Elsevier 🌐 English ⚖ 948 KB

A Finite Element Analysis of Stress Dist

A Finite Element Analysis of Stress Distribution in the Bone, Around the Implant Supporting a Mandibular Overdenture with Ball/O Ring and Magnetic Attachment

✍ Jins John; V. Rangarajan; Ravindra C. Savadi; K. S. Satheesh Kumar; Preeti Sathe 📂 Article 📅 2012 🏛 Springer-Verlag 🌐 English ⚖ 719 KB

Biomechanical analysis of alveolar bone

Biomechanical analysis of alveolar bone stress around implants with different thread designs and pitches in the mandibular molar area

✍ Ting-Hsun Lan; Je-Kang Du; Chin-Yun Pan; Huey-Er Lee; Wei-Hao Chung 📂 Article 📅 2011 🏛 Springer 🌐 English ⚖ 519 KB