## Abstract A novel two‐stage forked stepped‐impedance‐resonator (FSIR) bandpass filter design is presented. The FSIR originated from an SIR has its both open ends split as a fork structure. A tunable zero from the coupled lines is created to suppress the second harmonic of the resonator. Two addit
Stepped impedance hairpin design of a tunable bandpass filter with harmonic suppression
✍ Scribed by Yu-Wei Chen; Min-Hua Ho
- Publisher
- John Wiley and Sons
- Year
- 2006
- Tongue
- English
- Weight
- 159 KB
- Volume
- 48
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Stepped impedance hairpin resonators (SIHRs) with harmonic suppression and capability of frequency tuning are incorporated into a bandpass filter design. A tapped‐in U‐shaped feed structure is introduced to suppress harmonics and to reduce the passband insertion losses. The passband flexibility is accomplished by using a pair of tuning varactors. A simple method to implant a zero in the frequency response is also studied herein to further deepen the passband skirt. A 176% (4.32 GHz) stopband bandwidth is observed under more than 20‐dB band rejection. A measured minimum insertion loss of 1.19 dB is observed for the circuit with absence of the tuning varactors. Using the varactors, this filter has achieved a 22% frequency tuning range with all the insertion losses less than 5 dB. © 2006 Wiley Periodicals, Inc. Microwave Opt Technol Lett 48: 697–701, 2006; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.21447
📜 SIMILAR VOLUMES
## Abstract This paper describes the microstrip stepped‐impedance resonator (SIR) bandpass filter with an over‐coupling structure for the suppression of spurious response at twice the center frequency (2f~__0__~). In addition, the tapped I/O is used in the filter to create the extra transmission ze
## Abstract A bandpass filter is designed at 2.4 GHz using two end‐connected quarter‐wavelength stepped impedance resonators. The quarter‐wavelength stepped impedance resonators having one end shorted are formed by a half‐wavelength stepped impedance resonator with its middle shorting to ground. Th
## Abstract In this paper, a wide rejection bandwidth bandpass filter with stepped‐impedance hairpin (SIH) resonator and interlaced coupled‐line was proposed. With the former, its elliptic‐function low‐pass response was adopted to steepen the upper roll off characteristic and flatten the rejection
## Abstract We propose a compact dual band bandpass filter (BPF) using trisection stepped impedance resonators (SIRs). By appropriately selecting the impedance ratio (K) and length ratio (α) of the SIR, the harmonic frequencies can be tuned for generating the dual‐passband response. The BPF has goo
## Abstract In this article, the band‐pass filter (BPF) of stepped‐impedance hairpin (SIH) design having a very wide stopband performance was proposed.The filter composed of two SIHs connected by a narrow bended microstrip with the latter's middle point shorting to the ground through a via hole. A