𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Steady state creep during transformation in Al–1 wt.%Cu alloy

✍ Scribed by M.M. Mostafa; M.M. El-Sayed; H.A. El-Sayed; H. Abd-Elaleem

Publisher
Elsevier Science
Year
2009
Tongue
English
Weight
494 KB
Volume
518
Category
Article
ISSN
0921-5093

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Steady State Creep during Metastable Pha
Steady State Creep during Metastable Phase Transition in Al–16 wt% Ag and Al–16 wt% Ag–0.1 wt% Zr Alloys
✍ Deaf, G. H. ;Youssef, S. B. ;Mahmoud, M. A. 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 288 KB

The early stages of decomposition of Guinier-Preston zones (G.P. zones) in Al±16 wt% Ag and Al±16 wt% Ag±0.1 wt% Zr alloys were investigated through creep measurements and electron microscopy observations. It was found that the strengthening and softening of the alloys has been achieved during the f

Precipitation kinetics in Ag–2 wt%
Precipitation kinetics in Ag–2 wt% Cu and Ag–2 wt% Cu–0.5 wt% In alloys during transformation
✍ R.H. Nada 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 284 KB

The effect of quenching rate on the stress-strain characteristics of Ag-2 wt% Cu and Ag-2 wt% Cu-0.5 wt% In alloys was investigated in the temperature range from 723 K to 923 K. The work-hardening parameters s y , s f , and w, were found to decrease with increasing aging temperature exhibiting maxim

The variation of tensile characteristics
The variation of tensile characteristics of Al–2 wt.%Ag and Al–2 wt.%Ag–1 wt.%Sn alloys during transformation
✍ R.H. Nada 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 373 KB

Effect of tin addition and heat treatment on the work hardening characteristics of Al-2 wt.%Ag alloy during phase transformation has been studied in the deformation temperature range from 503 K to 583 K. The fracture strain ε f , and dislocation slip distance L increased with increasing deformation

Transient and steady-state creep charact
Transient and steady-state creep characteristics of Cu–2 wt% Sn alloy in the solid solution region
✍ G.S. Al-Ganainy; A. Fawzy; F. Abd El-Salam 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 309 KB

Bronzes exhibit a combination of high heat conductivity and excellent mechanical strength. They have many important commercial industrial applications. Isothermal tensile creep curves of Cu-2 wt% Sn were obtained in the solid solution region at temperatures 573, 623, 673 and 723 K under constant str

Pore filling in graphite particle compac
Pore filling in graphite particle compacts infiltrated with Al–12 wt.%Si and Al–12 wt.%Si–1 wt.%Cu alloys
✍ A. Rodríguez-Guerrero; J.M. Molina; F. Rodríguez-Reinoso; J. Narciso; E. Louis 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 598 KB

The drainage curves (saturation versus applied pressure) that characterize pressure infiltration of Al-12 wt.%Si and Al-12 wt.%Si-1 wt.%Cu alloys into particulate preforms made out of carbon particles of three sizes have been determined. The results show that, no matter the alloy or the particle pre