𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Spout diameters in full and half spouted beds

✍ Scribed by Ayn-Long He; Choon J. Lim; John R. Grace; Shao-Zhong Qin


Publisher
John Wiley and Sons
Year
1998
Tongue
English
Weight
460 KB
Volume
76
Category
Article
ISSN
0008-4034

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Spout diameter variation in two-dimensio
✍ R.S. Krzywanski; N. Epstein; B.D. Bowen πŸ“‚ Article πŸ“… 1989 πŸ› Elsevier Science 🌐 English βš– 789 KB

Relationships giving spout diameter as a function of height are developed for both twodimensional and cylindrical spouted beds, and tested against experimental data selected from the literature. The required input information includes the average spout diameter and the spout expansion angle. The for

Prediction of minimum spouting velocity
✍ Sivakumar Venkatachalam; Ramasamy Sridhar; Victorbackianathan Prince Immanuel πŸ“‚ Article πŸ“… 2009 πŸ› Wiley (John Wiley & Sons) 🌐 English βš– 84 KB πŸ‘ 1 views

## Abstract Minimum spouting velocity was measured using different bed heights with six different particles. A statistical analysis of the reported correlations for minimum spouting velocity based on the present and literature data was made and the estimated. Absolute average relative deviation (AA

Advances in Spouted Bed Technology
✍ Dr. Ir. P. M. Heertjes; Ir. G. K. Khoe πŸ“‚ Article πŸ“… 1980 πŸ› John Wiley and Sons 🌐 German βš– 404 KB

Das Geschwindigkeitsverhaltnis wird darin aus der Partikelsinkgeschwindigkeit, bei der die Verteilungssumme der Partikeln 50% betragt, zur mittleren Fluidgeschwindigkeit bestimmt. In unseren Rechnungen wurde eine Verteilungsfunktion D ( d ) nach Rosin-Rummler-Sperlirzg benutzt, von deren Parameter n

Chemical reaction in spouted beds
✍ J. DudΓ‘sΜ†; O. Seitz; L. JelemenskΓ½ πŸ“‚ Article πŸ“… 1993 πŸ› Elsevier Science 🌐 English βš– 370 KB

## INTRODUClTON The advantages of a spouted bed are well known for physical processes with coarse particles. These. processes involve drying, particle coating, granulation and heat transfer operations (Mathur and Epstein, 1974). The fluid from an inlet orifice penetrates through a bed of particle