𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Advances in Spouted Bed Technology

✍ Scribed by Dr. Ir. P. M. Heertjes; Ir. G. K. Khoe


Publisher
John Wiley and Sons
Year
1980
Tongue
German
Weight
404 KB
Volume
52
Category
Article
ISSN
0009-286X

No coin nor oath required. For personal study only.

✦ Synopsis


Das Geschwindigkeitsverhaltnis wird darin aus der Partikelsinkgeschwindigkeit, bei der die Verteilungssumme der Partikeln 50% betragt, zur mittleren Fluidgeschwindigkeit bestimmt. In unseren Rechnungen wurde eine Verteilungsfunktion D ( d ) nach Rosin-Rummler-Sperlirzg benutzt, von deren Parameter n der Sedimentationsgrad ebenfalls abhangt. Die Berechnung der Sedimentation fur kreisformige Rohre erfolgt in entsprechender Weise.


πŸ“œ SIMILAR VOLUMES


Spout diameters in full and half spouted
✍ Ayn-Long He; Choon J. Lim; John R. Grace; Shao-Zhong Qin πŸ“‚ Article πŸ“… 1998 πŸ› John Wiley and Sons 🌐 English βš– 460 KB
Prediction of minimum spouting velocity
✍ Sivakumar Venkatachalam; Ramasamy Sridhar; Victorbackianathan Prince Immanuel πŸ“‚ Article πŸ“… 2009 πŸ› Wiley (John Wiley & Sons) 🌐 English βš– 84 KB πŸ‘ 1 views

## Abstract Minimum spouting velocity was measured using different bed heights with six different particles. A statistical analysis of the reported correlations for minimum spouting velocity based on the present and literature data was made and the estimated. Absolute average relative deviation (AA

Chemical reaction in spouted beds
✍ J. DudΓ‘sΜ†; O. Seitz; L. JelemenskΓ½ πŸ“‚ Article πŸ“… 1993 πŸ› Elsevier Science 🌐 English βš– 370 KB

## INTRODUClTON The advantages of a spouted bed are well known for physical processes with coarse particles. These. processes involve drying, particle coating, granulation and heat transfer operations (Mathur and Epstein, 1974). The fluid from an inlet orifice penetrates through a bed of particle

Heat Transfer in Sprayed Spouted Beds
✍ Sebastian Englart; Andrzej Kmiec; Agnieszka Ludwinska πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 222 KB