A constant applied heat flux method has been used to measure the specific heat and thermal conductivity of large samples of Utah (North-west Asphalt Ridge) tar sands as a function of temperature. Independent measurements of density allowed for the calculation of thermal diffusivity. Constituent anal
Specific heat, thermal diffusivity and thermal conductivity of synroc, perovskite, zirconolite and barium hollandite
β Scribed by W.J. Buykx
- Publisher
- Elsevier Science
- Year
- 1982
- Tongue
- English
- Weight
- 467 KB
- Volume
- 107
- Category
- Article
- ISSN
- 0022-3115
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
Thermal conductivity, specific heat capacity and thermal diffusivity of borage (Borago officinalis) seeds were determined at temperatures ranging from 6 to 208C and moisture contents from 1Γ2 to 30Γ3% w.b. The thermal conductivity was measured by the transient technique using a line heat source. The
A heat pulse technique is described with a permanent heat link to the cold sink used for the measurement of small heat capacities, such as vitreous dielectrics, down to 25 mK. Total heat capacities of the order of 5pJ K -1 are measured below 50 mK with an accuracy of 5%. Two carbon resistor thermome
## Abstract The specific heat (__C__) and thermal diffusivity (__D__) of vinylidene fluoride (VDF)/trifluoroethylene copolymers with 70 and 56 mol % of VDF were measured between 200 and 390 K, and the thermal conductivity (__K__) was calculated from these data. __C__, __D__, and __K__ were rather i