𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Some design considerations of a draft tube gas-liquid-solid spouted bed

✍ Scribed by S.-J. Hwang; Liang-Shih Fan


Publisher
Elsevier Science
Year
1986
Weight
730 KB
Volume
33
Category
Article
ISSN
0300-9467

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Hydrodynamic and mass transfer study of
✍ D.G. Karamanev; T. Nagamune; I. Endo πŸ“‚ Article πŸ“… 1992 πŸ› Elsevier Science 🌐 English βš– 652 KB

It has already been proved that the soft polyurethane foam particles are very effective carriers for immobilizing fungi and/or mycelia. However, the classic three phase fluid&d bed bioreactor was not effective enough for the production of antibiotics like penicillin due to the lower value of the mas

Solid circulation in a liquid spout-flui
✍ F. Figen Ar; B. ZΓΌhtΓΌ Uysal πŸ“‚ Article πŸ“… 1998 πŸ› Wiley (John Wiley & Sons) 🌐 English βš– 238 KB πŸ‘ 1 views

Considering the application of the technique of liquid spouting with multi draft tubes to heat exchangers, the solids circulation rate was studied both experimentally and theoretically. It was found that the solids circulation rate increased with the liquid velocity and with the amount of solids use

A fluid dynamic model of the draft tube
✍ Lj. Kundakovic; G. Vunjak-Novakovic πŸ“‚ Article πŸ“… 1995 πŸ› Elsevier Science 🌐 English βš– 950 KB

Al~traet--Fluid dynamics of gas-liquid-particle flow in the draft tube and liquid-particle flow in the annulus were studied for a draft-tube fluidized bed (DTFB) operating in the circulating regime. The local concentrations and velocities of the continuous liquid phase, solid particles and air bubbl

Flow regimes and liquid mixing in a draf
✍ G. Vunjak-Novakovic; G. Jovanovic; Lj. Kundakovic; B. Obradovic πŸ“‚ Article πŸ“… 1992 πŸ› Elsevier Science 🌐 English βš– 681 KB

Flow behavior of gas bubbles, liquid and particles, and mixing in the liquid phase were studied in draft and annulus of a draft tube gas-liquid-solid fluidized bed. The experimental unit was a 80mm ID x 1.5 m column with an 50mm ID internal draft tube. A Z-D unit of the same size and geometry was us