✦ LIBER ✦

Some aspects of thermal fatigue in stainless steel

✍ Scribed by A.F. Iorio; J.C. Crespi

Publisher: Elsevier Science
Year: 1986
Tongue: English
Weight: 697 KB
Volume: 23
Category: Article
ISSN: 0308-0161
DOI: 10.1016/0308-0161(86)90016-5

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Some Aspects of the Influence of Mangane

Some Aspects of the Influence of Manganese in Austenitic Stainless Steels

✍ J. Degerbeck; E. Wold 📂 Article 📅 1974 🏛 John Wiley and Sons 🌐 German ⚖ 324 KB 👁 1 views

## Abstract The effect of Mn on the pitting corrosion resistance of 18 8 steels is due to its sulphide forming ability, because the sulphides are then present as non‐metallic inclusions. As is shown by the authors that reduction of the manganese content of these steels (from normally 1.8% to values

Rate of development of fatigue cracks in

Rate of development of fatigue cracks in some high-alloy martensitic stainless steels

✍ M. O. Levitskii; T. N. Kalichak; L. S. Fedotova; M. F. Alekseenko 📂 Article 📅 1977 🏛 Springer 🌐 English ⚖ 257 KB

Fatigue crack propagation in austenitic

Fatigue crack propagation in austenitic stainless steels

✍ Anthony W. Thompson 📂 Article 📅 1975 🏛 Elsevier Science 🌐 English ⚖ 820 KB

## AMraet-Fatigue crack growth rate was found to be independent of grain size in 309!3 stainless steel, for grain sizes of 45 and 480 pm. The data were compared to literature results for a variety of stabk and mtstabie austerdtic alloys, and were shown to agree well, THE RECENT literature on fatig

Fatigue damage of stainless steel diffus

Fatigue damage of stainless steel diffusion-bonded joints

✍ Shu-Xin Li; Fu-Zhen Xuan; Shan-Tung Tu 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 468 KB

Corrosion fatigue crack initiation in 12

Corrosion fatigue crack initiation in 12% chromium stainless steel

✍ Ryuichiro Ebara 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 696 KB

Characteristics of corrosion fatigue failures of steam turbine blades derived from failure analysis are summarized. Then corrosion fatigue variables on corrosion fatigue strength of 12% chromium stainless steel are briefly reviewed. The paper emphasizes initiation and growth of corrosion pits in the

Corrosion fatigue of surgical stainless

Corrosion fatigue of surgical stainless steel in synthetic physiological solution

✍ Cahoon, J. R. ;Holte, Richard N. 📂 Article 📅 1981 🏛 John Wiley and Sons 🌐 English ⚖ 477 KB

## Abstract Fatigue tests conducted both in air and synthetic physiological solution show that the fatigue strength of surgical stainless steel in synthetic physiological solution is about 10% lower than the strength in air for a given endurance level. It is proposed that surgical stainless steel w