✦ LIBER ✦

Corrosion fatigue of surgical stainless steel in synthetic physiological solution

✍ Scribed by Cahoon, J. R. ;Holte, Richard N.

Publisher: John Wiley and Sons
Year: 1981
Tongue: English
Weight: 477 KB
Volume: 15
Category: Article
ISSN: 0021-9304
DOI: 10.1002/jbm.820150203

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

Fatigue tests conducted both in air and synthetic physiological solution show that the fatigue strength of surgical stainless steel in synthetic physiological solution is about 10% lower than the strength in air for a given endurance level. It is proposed that surgical stainless steel which is normally passive in physiological solution suffers corrosion fatigue because of susceptibility to crevice corrosion which occurs at extrusions and intrusions (crevices) on the surface thereby shortening the crack initiation time and the fatigue life.

📜 SIMILAR VOLUMES

Corrosion fatigue of weld-bonded austeni

Corrosion fatigue of weld-bonded austenitic stainless steels in 3.5% NaCl solution

✍ M. E. Somervuori; M. T. Alenius; T. Kosonen; R. Karppi; H. E. Hänninen 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 German ⚖ 379 KB 👁 1 views

## Abstract Corrosion fatigue and fatigue properties of weld‐bonded and spot‐welded austenitic stainless steels EN 1.4301 and EN 1.4318 in 2B or 2F and 2H conditions were investigated. The corrosive environment was 3.5% NaCl solution at + 50 °C. In air the fatigue strengths of the weld‐bonded singl

In vitro corrosion fatigue of 316L cold

In vitro corrosion fatigue of 316L cold worked stainless steel

✍ Taira, Masayuki ;Lautenschlager, Eugene P. 📂 Article 📅 1992 🏛 John Wiley and Sons 🌐 English ⚖ 468 KB 👁 1 views

Corrosion protection of stainless steel

Corrosion protection of stainless steel by separate polypyrrole electrode in acid solutions

✍ J. Hu; H. Zhu; Y. Ma; T. Yi; X. Mao; A. Lin; F. Gan 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 German ⚖ 353 KB 👁 1 views

## Abstract Galvanic anodic protection (GAP) of stainless steels by doped polypyrrole (PPy) was investigated using chemically synthesized PPy. Separate PPy powder‐pressed electrodes with different surface areas were prepared. Electrochemical properties of PPy electrodes were studied by open circuit

Potentiokinetic Criteria relevant to the

Potentiokinetic Criteria relevant to the pitting corrosion of stainless steels in chloride solutions

✍ Dr. R. Štefec 📂 Article 📅 1982 🏛 John Wiley and Sons 🌐 German ⚖ 333 KB 👁 1 views

## Abstract The adequacy of 7 parameters of potentiokinetic curves for evaluating the resistance to pitting corrosion in sodium chloride solutions was quantitatively assessed by reference to immersion testing in ferric chloride solutions for 11 type CrNi (MoTiCu) stainless steels on the basis of 31

Inhibition of 304 stainless steel corros

Inhibition of 304 stainless steel corrosion in acidic solution by Ferula gumosa (galbanum) extract

✍ M. Behpour; S. M. Ghoreishi; M. Khayat Kashani; N. Soltani 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 German ⚖ 129 KB 👁 1 views

## Abstract The inhibition effect of the extract of galbanum (__Ferula gummosa__ Boiss.) on the corrosion of 304 stainless steel in 2 M HCl solution was studied by weight loss measurements, Tafel polarization, and electrochemical impedance spectroscopy (EIS) methods. It was found that the inhibitio

Pitting and crevice corrosion behaviour

Pitting and crevice corrosion behaviour of high alloy stainless steels in chloride-fluoride solutions

✍ A. Pardo; M. C. Merino; E. Otero; M. D. López; M. V. Utrilla 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 German ⚖ 310 KB 👁 1 views

The localised corrosion resistance (pitting and crevice corrosion) of two high alloy stainless steels, namely superduplex (SD) and superaustenitic (SA), has been studied in chloride-fluoride solutions at pH values ranging from 2 to 6.5. The pitting potential (E pit ) and crevice potential (E cre ) h