Solvent extraction with LIX 973N for the selective separation of copper and nickel
✍ Scribed by Francisco José Alguacil; Antonio Cobo
- Publisher
- Wiley (John Wiley & Sons)
- Year
- 1999
- Tongue
- English
- Weight
- 76 KB
- Volume
- 74
- Category
- Article
- ISSN
- 0268-2575
No coin nor oath required. For personal study only.
✦ Synopsis
LIX 973N diluted with Iber¯uid was used to co-extract copper and nickel from ammoniacal/ ammonium carbonate aqueous media. The in¯uence of equilibration time, temperature, equilibrium pH and extractant concentration on the extraction of both metals has been studied. It was observed that neither copper nor nickel extraction is sensitive to temperature and equilibrium pH, however nickel extraction equilibrium is reached at a longer contact time (20 min) than that of copper (5 min), in addition nickel extraction depends greatly on the extractant concentration in the organic phase. For a solution containing 3 g dm À3 each of copper and nickel and 60 g dm À3 ammonium carbonate, conditions were established for the co-extraction of both metals, ammonia scrubbing and selective stripping (with H 2 SO 4 ) of nickel and copper. Using the appropriate extractant concentration the yield (extraction stage) for both metals is near 100%, whereas the percentage of nickel and copper stripping is also almost quantitative.
📜 SIMILAR VOLUMES
## Abstract A selective and sensitive method for the preconcentration, separation, and determination of palladium with flame atomic absorption spectrometry using 4,15‐bis[(4‐methylphenyl)sulfonyl]‐20,21‐dinitro‐2,3,4,5,6,7,9,10,12,13,14,15,16,17‐tetradecahydro‐8,11‐ethano‐1,18,4,8,11,15‐benzodioxa
consisting of proton transfer from the substrate to base in a rapid and reversible reaction, whose position of equilibrium is governed by the hydroxide ion concentration, followed by an "uncatalyzed" rate-determining protonation at carbon by water. The hydroxide-ion catalytic coefficient for such a
In order to investigate the relationship between terpenoid content and black bear foraging preference, an analytical method was required to quantify mono-and sesquiterpenoids present in Douglas-fir sapwood. Sapwood samples were scraped from trees, immediately frozen in liquid nitrogen, and then homo