The design, development, and testing of a flow-injection analysis (FIA) manifold for the simultaneous determination of two species in milk samples is reported. Calcium is determined potentiometrically, and, following on-line sample treatment, spectrophotometric analysis of phosphorus is performed. R
Simultaneous determination of fluoride and phenolics in water using flow-injection analysis
β Scribed by John R. Farrell; Peter J. Iles; Terry J. Sands
- Publisher
- John Wiley and Sons
- Year
- 1999
- Tongue
- English
- Weight
- 116 KB
- Volume
- 11
- Category
- Article
- ISSN
- 0895-7533
No coin nor oath required. For personal study only.
β¦ Synopsis
The design, development, and testing of a flow-injection analysis (FIA) manifold for the simultaneous determination of two species in water samples are reported. Fluoride is determined potentiometrically, and, following on-line sample dilution and treatment, amperometric analysis of phenolics is performed. The combination FIA system is a rapid, low-cost, highly reproducible method that uses small sample volumes and could be used to provide on-site near-real-time measurements.
π SIMILAR VOLUMES
In this article, we describe an automated flow-injection system for simultaneous determination of Cl β«Χβ¬ and total Fe. Chloride was potentiometrically determined, and total Fe was colorimetrically determined after reduction of Fe(III) to Fe(II) and complexation with 1,10-phenanthroline. Both measure
The analytical application of a simple polarographic Β―ow through cell, which was previously designed for the continuous polarographic analysis of organic compounds in pharmaceuticals and urine, is proposed in this work for the determination of copper in diluted water samples. The cell contains a con
## Abstract A simple and rapid flowβinjection chemiluminescence method has been developed for the determination of dithiocarbamate fungicide thiram based on the chemiluminescence reaction of thiram with ceric sulfate and quinine in aqueous sulfuric acid. The present method allowed the determination
A simple design of a polarographic flow-through cell is proposed in which a conventional dropping mercury electrode (DME) is used as working electrode, and a mercury pool and a platinum wire are used as the reference and counter electrodes, respectively. The mercury droplets falling from the DME coa