𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Simulation, calculation and possibilities of energy saving in spray drying process

✍ Scribed by Darko Velić; Mate Bilić; Srećko Tomas; Mirela Planinić

Publisher
Elsevier Science
Year
2003
Tongue
English
Weight
134 KB
Volume
23
Category
Article
ISSN
1359-4311

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Process and equipment simulation of dry
Process and equipment simulation of dry silicon etching in the absence of ion bombardment
✍ T. Otto; H. Wolf; R. Streiter; A. Dehoff; K. Wandel; T. Gessner 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 689 KB

The dependence of the etch rate uniformity across the wafer on the reactor design and various process parameters was investigated for the reactive ion etching (RIE) of silicon using pure sulphur hexafluoride (SF ). The experiments were 6 carried out in two different single wafer reactors without ion

Estimation of the drying rate and moistu
Estimation of the drying rate and moisture profiles in an industrial spray dryer by means of experimental investigations and a simulation study
✍ Dr.-Ing. Georg Fieg; Prof. Dr.-Ing. Günter Wozny; Dipl.-Ing. Kurt Buick; Dr. phi 📂 Article 📅 1994 🏛 John Wiley and Sons 🌐 English ⚖ 561 KB

A spray dryer simulation program is described. It is based on the known conservation laws and permits determination of temperature and moisture profiles and droplet trajectories inside spray dryers. An industrial spray dryer used in the manufacture of detergents serves as an example to demonstrate t