𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Simplex optimization of a programmed temperature capillary gas chromatographic separation

✍ Scribed by Lanças, Fernando M. ;Francelin, Roseli A. ;de Souza, Ailton J.

Publisher
John Wiley and Sons
Year
1991
Tongue
English
Weight
375 KB
Volume
14
Category
Article
ISSN
0935-6304

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A practical approach for optimization of
A practical approach for optimization of a selective gas-chromatographic detector by a sequential simplex method
✍ Hsu, F. ;Anderson, J. ;Zlatkis, A. 📂 Article 📅 1980 🏛 John Wiley and Sons 🌐 English ⚖ 229 KB

approximate movement of the plunger during packing is 40 mm. The diagram (Figure 1) is to scale, except for the O-rings, valves and tube fittings. Packing with this system wassatisfactoryexcept when we failed to add enough packing material to fill the column completely, or when the stirring bar fail

Supercritical fluid chromatographic sepa
Supercritical fluid chromatographic separation of polychlorinated biphenyls (PCBs) using a negative temperature gradient for density programming
✍ Cammann, Karl ;Kleiböhmer, Wolfgang 📂 Article 📅 1991 🏛 John Wiley and Sons 🌐 English ⚖ 317 KB

## Abstract The technical PCB mixtures Aroclol and Clophen have been analyzed by packed column supercritical fluid chromatography using negative temperature programming. The chromatographic method was successfully applied to the analysis of PCBs, polycyclic aromatic hydrocarbons, and polychlorinate

Gas chromatography: Elution temperature,
Gas chromatography: Elution temperature, speed of analysis, and separation, efficiency as influenced by rate of temperature programming and carrier gas velocity in open tubular glass capillary columns
✍ W.G. Jennings; S. Adam 📂 Article 📅 1975 🏛 Elsevier Science 🌐 English ⚖ 466 KB

The elution temperatures and degree of separation of a model system series of hydrocarbons were followed as functions of the rate of temperature programming and carrier gas velocity. Graphs are presented that permit individual assessment of these variables. Lower elution temperatures can be achieved