𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Simple fabrication of a “Grob” injector

✍ Scribed by Hines, John W. ;Erickson, Mitchell D. ;Newton, David L. ;Moseley, M. Arthur ;Retzlaff, Lyle M. ;Pellizzari, E. D.

Publisher
John Wiley and Sons
Year
1982
Tongue
English
Weight
173 KB
Volume
5
Category
Article
ISSN
0935-6304

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Modification of a packed GC injector to
Modification of a packed GC injector to a versatile capillary injector
✍ Etzweiler, F. 📂 Article 📅 1985 🏛 John Wiley and Sons 🌐 English ⚖ 335 KB

A modification of a packed GC injector to a capillary injector is presented using a simple device which is connected to the GC column by an adsorption-free connector. It permits injections of large sample volumes up to 500 PI hexane solutions on normal 0.3 mm i.d. capillary columns. No special requi

Airbag fabric material modeling of nylon
Airbag fabric material modeling of nylon and polyester fabrics using a very simple neural network architecture
✍ Ramesh Keshavaraj; Richard W. Tock; Dan Haycook 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 909 KB

## SYNOPSIS The material properties of engineering fabrics that are used to manufacture airbags can not be modeled easily by the available nonlinear elastic-plastic shell elements. A nonlinear membrane element that incorporates an elaborate tissue material model has been widely used by the auto in

Simple and inexpensive fabrication of sm
Simple and inexpensive fabrication of small-volume density gradients
✍ Joseph M. Corless 📂 Article 📅 1978 🏛 Elsevier Science 🌐 English ⚖ 249 KB

Conventional large-volume gradient makers can be used in conjunction with peristaltic pumps to produce density gradients with total volumes as small as desired. The described approach involves continuous sampling of the large-volume gradient at a specific rate.