𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Modification of a packed GC injector to a versatile capillary injector

✍ Scribed by Etzweiler, F.

Publisher
John Wiley and Sons
Year
1985
Tongue
English
Weight
335 KB
Volume
8
Category
Article
ISSN
0935-6304

No coin nor oath required. For personal study only.

✦ Synopsis

A modification of a packed GC injector to a capillary injector is presented using a simple device which is connected to the GC column by an adsorption-free connector. It permits injections of large sample volumes up to 500 PI hexane solutions on normal 0.3 mm i.d. capillary columns. No special requirements for the stationary phase are necessary. Involatile residues remain inside the device which can be exchanged easily. High performance of separation and quantification is achieved.

πŸ“œ SIMILAR VOLUMES

Application of a thermal desorption cold
Application of a thermal desorption cold trap injector to multidimensional GC and GC-MS
✍ Nishimura, Osamu πŸ“‚ Article πŸ“… 1995 πŸ› John Wiley and Sons 🌐 English βš– 447 KB

## Abstract The Thermal desorption Cold Trap injector (TCT) was used as a part of modified multidimensional GC (MDGC) or MDGC mass spectroscopy (MS) systems. These systems were based on a preparative GC (GC1), an analytical GC (GC2), or GC‐MS and the TCT. The TCT was mounted on the GC2 or GC‐MS. An

Use of a temperature programmed injector
Use of a temperature programmed injector with a packed liner for direct water analysis and on-line reversed phase LC-GC
✍ Mol, Hans G. J. ;Janssen, Hans-Gerd M. ;Cramers, Carel A. ;Brinkman, Udo A. Th. πŸ“‚ Article πŸ“… 1993 πŸ› John Wiley and Sons 🌐 English βš– 525 KB

## Abstract A system is described that allows the introduction of large volumes of water samples in capillary GC. Water elimination is carried out in the solvent split mode in a PTV injector with a packed liner. Two ways of separating water and analytes, __i.e.__ evaporative and non‐evaporative (so

Potential and limitations of differently
Potential and limitations of differently designed programmed-temperature injector liners for large volume sample introduction in capillary GC
✍ Staniewski, Jacek ;Rijks, Jacques A. πŸ“‚ Article πŸ“… 1993 πŸ› John Wiley and Sons 🌐 English βš– 617 KB

## Abstract Programmed temperature sample introduction is an attractive technique both for the introduction of large volumes of dilute samples in capillary gas chromatography and for LC‐GC interfacing. In this study a new type of liner containing a porous bed of sintered glass is introduced and ev