𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Sigma phase precipitation in duplex stainless steel 2205

✍ Scribed by Henrik Sieurin; Rolf Sandström

Publisher
Elsevier Science
Year
2007
Tongue
English
Weight
200 KB
Volume
444
Category
Article
ISSN
0921-5093

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

In situ observations of sigma phase diss
In situ observations of sigma phase dissolution in 2205 duplex stainless steel using synchrotron X-ray diffraction
✍ J.W. Elmer; T.A. Palmer; E.D. Specht 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 678 KB

Synchrotron radiation was used to directly observe the transformation of ferrite, austenite and sigma phases during heating and cooling of 2205 duplex stainless steel. Sigma formed during the initial stages of heating, dissolved as the temperature was increased, and reformed on cooling. The dissolut

Sigma phase in 321 stainless steel
Sigma phase in 321 stainless steel
✍ J. M. A. Van Der Horst 📂 Article 📅 1973 🏛 John Wiley and Sons 🌐 English ⚖ 731 KB

## Abstract The failure of a 321 stainless steel flange due to the presence of sigma phase was used to check etching procedures for sigma phase in 321 SS as well as to establish the time‐temperature diagram for sigma phase in this material.

Austenite reformation in the heat-affect
Austenite reformation in the heat-affected zone of duplex stainless steel 2205
✍ Henrik Sieurin; Rolf Sandström 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 425 KB

The aim of the present work was to evaluate the amount of reformed austenite in the heat-affected zone (HAZ) of submerged arc welded (SAW) duplex stainless steel 2205. The model is based on calculations of the nucleation and growth of austenite. The present results are compared with other studies to

The effect of shot peening on stress cor
The effect of shot peening on stress corrosion cracking behaviour of 2205-duplex stainless steel
✍ Y.F. Al-Obaid 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 509 KB

In this paper an attempt has been made to study the effect of shot peening on stress corrosion cracking of 2205-Duplex stainless steel. Cast steel shot was selected to be the peening media. Specimens of 2205-Duplex stainless steel were tested in the peened and unpeened condition. Quantitative data o