✦ LIBER ✦

Si3N4-doped Zr50Al15Ni10Cu25 glassy alloy by mechanical alloying and sintering process

✍ Scribed by Ouyang, Xue-qiong ;Long, Wo-yun ;Bian, Jian-ze ;Gao, Chao ;Lu, An-xian

Publisher: Chinese Electronic Periodical Services
Year: 2010
Tongue: English
Weight: 750 KB
Volume: 17
Category: Article
ISSN: 1005-9784
DOI: 10.1007/s11771-010-0606-1

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A Novel Cemented Hard Alloy Prepared by

A Novel Cemented Hard Alloy Prepared by Mechanical Alloying and Hot-Pressing Sintering

✍ Z. Qiao; X. F. Ma; W. Zhao; H. Tang; S. Cai; B. Zhao 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 189 KB 👁 2 views

Fabrication, microstructure and mechanic

Fabrication, microstructure and mechanical properties of novel cemented hard alloy obtained by mechanical alloying and hot-pressing sintering

✍ Zhuhui Qiao; Xianfeng Ma; Wei Zhao; Huaguo Tang; Shuguang Cai; Bo Zhao 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 545 KB

Synthesis of a lightweight Ti–10Al–5Mg (

Synthesis of a lightweight Ti–10Al–5Mg (wt.%) alloy by mechanical alloying followed by compaction and sintering

✍ M. Caetano; B. Trindade 📂 Article 📅 2007 🏛 Springer 🌐 English ⚖ 594 KB

Microstructure and properties of W-15Cu

Microstructure and properties of W-15Cu alloys prepared by mechanical alloying and spark plasma sintering process

✍ Qiaoxin Zhang; Xiaoliang Shi; Hua Yang; Xinglong Duan 📂 Article 📅 2008 🏛 Wuhan University of Technology 🌐 English ⚖ 420 KB

Effects of process parameters on electri

Effects of process parameters on electrical properties of n-type Bi2Te3 prepared by mechanical alloying and spark plasma sintering

✍ L.D. Zhao; B.-P. Zhang; J.-F. Li; M. Zhou; W.S. Liu 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 481 KB

n-Type Bi 2 Te 3 thermoelectric materials were prepared by spark plasma sintering (SPS) using mechanically alloyed powders. Seebeck coefficient and electrical conductivity of the resultant materials were measured, with emphasis on the effects of sintering process parameters on the electrical propert