✦ LIBER ✦

Shielding effectiveness of a metallic enclosure with multiple apertures

✍ Scribed by Chao Feng; Zhongxiang Shen

Publisher: John Wiley and Sons
Year: 2004
Tongue: English
Weight: 107 KB
Volume: 43
Category: Article
ISSN: 0895-2477
DOI: 10.1002/mop.20498

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

In this paper, we employ the hybrid finite difference–moment method to predict the shielding effectiveness (SE) of a metallic enclosure with multiple apertures. The numerical results for various aperture configurations using the hybrid technique are presented and validated. It is found that a good practice to improve the shielding effectiveness of metallic enclosures is to divide a large aperture into several smaller ones. © 2004 Wiley Periodicals, Inc. Microwave Opt Technol Lett 43: 447–450, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.20498

📜 SIMILAR VOLUMES

Shielding effectiveness of enclosure wit

Shielding effectiveness of enclosure with thick multiple apertures

✍ Joo G. Lee; Hyo J. Eom; Byung W. Kim; Hyun H. Park 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 196 KB

## Abstract This letter shows a method for approximately calculating the shielding effectiveness of a rectangular enclosure with thick multiple apertures. Numerical results illustrate the shielding effectiveness of the enclosure with various thicknesses and aperture spacings. This method is reasona

Fast computation of shielding effectiven

Fast computation of shielding effectiveness of metallic enclosures with apertures and inner elements

✍ Antonio J. Lozano-Guerrero; Alejandro Díaz-Morcillo; Miguel Á. García-Fernández; 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 260 KB

## Abstract In this study, radiated immunity and emission of a metallic box with apertures have been evaluated through a fast approach. The influence of printed circuit boards inside the enclosure has been studied and also the effect of placing conductive polymer sheets in the housing to characteri

FDTD analysis of electromagnetic penetra

FDTD analysis of electromagnetic penetration into a rectangular enclosure with multiple rectangular apertures

✍ Hyun H. Park; Byung W. Kim; Yeon C. Chung; Joo G. Lee 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 123 KB

noise, and thermal noise. Since the APD output is mostly modeled as a Gaussian process, Gaussian approximation is employed for the analysis. For the purpose of mathematical simplicity, chip synchronization between the users is assumed. The error performance of the MWOOC system is compared with that

Evaluation of the effects of an external

Evaluation of the effects of an external incident electromagnetic wave on metallic enclosures with rectangular apertures

✍ R. Azaro; S. Caorsi; M. Donelli; G. L. Gragnani 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 185 KB 👁 1 views

Effect of ESD injection locations on ind

Effect of ESD injection locations on induced noise inside a shielded enclosure

✍ K. H. Chan; L. C. Fung; S. W. Leung 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 212 KB

## Abstract Electrostatic discharge (ESD) on the metallic enclosure of electronic products normally generates unwanted radiated electromagnetic interference (EMI). The radiated EMI penetrates through the apertures on the enclosure and then couples to the circuitries inside the enclosure. This may c

ChemInform Abstract: Unprecedented Linki

ChemInform Abstract: Unprecedented Linking of Two Polyoxometalate Units with a Metal—Metal Multiple Bond.

✍ Maxim N. Sokolov; Vladimir S. Korenev; Natalya V. Izarova; Eugenia V. Peresypkin 📂 Article 📅 2009 🏛 John Wiley and Sons ⚖ 21 KB 👁 1 views

## Abstract ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable v