✦ LIBER ✦

Shape Optimization of a plate-fin type heat sink with triangular-shaped vortex generator

✍ Scribed by Park, Kyoungwoo ;Choi, Dong-Hoon

Publisher: Springer-Verlag
Year: 2004
Tongue: Korean
Weight: 895 KB
Volume: 18
Category: Article
ISSN: 1226-4865
DOI: 10.1007/bf02990374

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Heat transfer enhancement by using a rec

Heat transfer enhancement by using a rectangular wing vortex generator on the triangular shaped fins of a plate-fin heat exchanger

✍ Gulshan Sachdeva; K.S. Kasana; R. Vasudevan 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 607 KB

## Abstract The present numerical analysis pertains to the heat transfer enhancement in a plate‐fin heat exchanger employing triangular shaped fins with a rectangular wing vortex generator on its slant surfaces. The study has been carried out for three different angles of attack of the wing, i.e.,

Computation of heat transfer enhancement

Computation of heat transfer enhancement in a plate-fin heat exchanger with triangular inserts and delta wing vortex generator

✍ Gulshan Sachdeva; R. Vasudevan; K. S. Kasana 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 584 KB

## Abstract Longitudinal vortices disrupt the growth of the thermal boundary layer, thereby the vortex generators producing the longitudinal vortices are well known for the enhancement of heat transfer in compact heat exchangers. The present investigation determines the heat transfer characteristic

Influence of fan setting height on the c

Influence of fan setting height on the cooling performance of a plate-fin-type heat sink with microprocessor

✍ Keizou Kawamura; Tadakatsu Nakajima; Hitoshi Matsushima 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 147 KB 👁 1 views

## Abstract The cooling performance of a plate‐fin‐type heat sink equipped with a cooling fan was investigated experimentally. The heat sink was 80 mm long, 43 mm wide, and 24 mm in height (including the 4‐mm‐thick base). The cooling fan was 40 × 40 × 15 mm and was set to direct the air flow vertic