A new nondestructive technique, confocal scanning laser microscopy (CSLM), is described that is used to characterize the topography and morphology of polymer coatings. The topography of the coating can be determined even when the coating is completely opaque. When the coating is not completely opaqu
Scanning force microscopy of spin-coated humic acid
✍ Scribed by Mertig, Michael; Klemm, Denis; Pompe, Wolfgang; Zänker, Harald; Böttger, Manfred
- Publisher
- John Wiley and Sons
- Year
- 1999
- Tongue
- English
- Weight
- 411 KB
- Volume
- 27
- Category
- Article
- ISSN
- 0142-2421
No coin nor oath required. For personal study only.
✦ Synopsis
We report on investigations of spin-coated peat humic acid solutions by scanning force microscopy allowing, for the Ðrst time, direct imaging of individual single humic acid molecules with a minimum diameter of 1.5-3.5 nm. The measured height of the molecules deposited onto a mica substrate increases with decreasing pH value of the solution. This behaviour can be explained by means of the random coil model if one takes the existence of charge carriers in organic macromolecules into consideration. With increasing humic acid concentration the molecules arrange into a few monolayer-thick agglomerates formed during the process of Ðlm deposition. In unÐltered solutions and in 1000 nm Ðltrates we Ðnd additional particles well distinct from the above-mentioned molecules in size and properties. They possess an equivalent spherical diameter of 70-160 nm and behave inert when the ambient conditions are changed.
📜 SIMILAR VOLUMES
The probe-sample force in tapping mode scanning force microscopy was evaluated using the phenomenon of sublimation of organic benzamide crystal and the assumption that the equal rate of sublimation in both tapping and contact modes is caused by the equal probe-sample force. Contact force was estimat
In this paper we present results concerning the development of a lithographic technique suitable for application to Langmuir-Blodgett films. Controlled ablations of well-defined portions of the film have been made by using a scanning force microscope (SFM). We report the values of the microscope ope