Review of thermally point-bonded nonwovens: Materials, processes, and properties

✍ Scribed by Stephen Michielsen; Behnam Pourdeyhimi; Prashant Desai

• Publisher: John Wiley and Sons
• Year: 2005
• Tongue: English
• Weight: 200 KB
• Volume: 99
• Category: Article
• ISSN: 0021-8995
• DOI: 10.1002/app.22858

✦ Synopsis

Abstract

Recent research on all aspects of thermally point‐bonded nonwovens has led to considerable improvements in the understanding of material requirements for these nonwovens, the changes that occur during bonding, and the mechanical properties of the resultant nonwoven materials. This article will review (1) how the thermal bonding process transforms the material properties of feed fibers, (2) the implications for material selection, and (3) the resultant failure properties of the bonded nonwoven. The formation of a bond during thermal bonding follows in sequence through three critical steps: (1) heating the web to partially melt the crystalline region, (2) reptation of the newly released chain segments across the fiber–fiber interface, and (3) subsequent cooling of the web to re‐solidify it and to trap the chain segments that diffused across the fiber–fiber interface. The time scales for these processes closely match commercial practice. In addition, adequate pressure is required to compress the fibers that form the bond spots and enhance heat transfer to these fibers. However, pressures typically used in commercial practice are insufficient to increase the melting temperature significantly or to produce significant heating due to compression of the fibers. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006