✦ LIBER ✦

Removal of H2S from fuel gases at high temperatures using MnO/γ-Al2O3

✍ Scribed by Hüsnü Atakül; J.Peter Wakker; Albert W. Gerritsen; Pieter J. van den Berg

Publisher: Elsevier Science
Year: 1995
Tongue: English
Weight: 627 KB
Volume: 74
Category: Article
ISSN: 0016-2361
DOI: 10.1016/0016-2361(95)92653-n

No coin nor oath required. For personal study only.

✦ Synopsis

MnO supported by y-Al,O, (Ketjen 00-lSE), MnOpi-Al,O,, was used as a sorbent for high temperature removal of H,S from gases. The sorbent was prepared by wet impregnation

📜 SIMILAR VOLUMES

Regeneration of MnO/γ-Al2O3 used for hig

Regeneration of MnO/γ-Al2O3 used for high-temperature desulfurization of fuel gases

✍ Hüsnü Atakül; J.Peter Wakker; Albert W. Gerritsen; Pieter J. van den Berg 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 489 KB

The regeneration of MnO/,7-A1203 used as a sorbent to remove H2S from fuel gases was studied with a packed bed reactor. The sorbent was prepared by wet method in which MnO was impregnated onto a standard 7-A1203. The sorbent was regenerated at 600°C. The regenerating gas was a mixture of N2, H2 and

Preparation of the Mn/γ-Al2O3 acceptor f

Preparation of the Mn/γ-Al2O3 acceptor for high temperature regenerative H2S removal

✍ Bin Liang; Rob Korbee; Albert W. Gerritsen; Cor M. Van Den Bleek 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 710 KB

An adiabatic calorimeter for use at supe

An adiabatic calorimeter for use at superambient temperatures. The heat capacity of synthetic sapphire (α-Al2O3) from 300 to 550 K

✍ John T.S Andrews; Paul A Norton; Edgar F Westrum Jr. 📂 Article 📅 1978 🏛 Elsevier Science 🌐 English ⚖ 623 KB

An adiabatic calorimeter for use at inte

An adiabatic calorimeter for use at intermediate and higher temperatures The heat capacity of synthetic sapphire (α-Al2O3) from 70 to 700 K

✍ A. Inaba 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 421 KB