MnO supported by y-Al,O, (Ketjen 00-lSE), MnOpi-Al,O,, was used as a sorbent for high temperature removal of H,S from gases. The sorbent was prepared by wet impregnation
Regeneration of MnO/γ-Al2O3 used for high-temperature desulfurization of fuel gases
✍ Scribed by Hüsnü Atakül; J.Peter Wakker; Albert W. Gerritsen; Pieter J. van den Berg
- Publisher
- Elsevier Science
- Year
- 1996
- Tongue
- English
- Weight
- 489 KB
- Volume
- 75
- Category
- Article
- ISSN
- 0016-2361
No coin nor oath required. For personal study only.
✦ Synopsis
The regeneration of MnO/,7-A1203 used as a sorbent to remove H2S from fuel gases was studied with a packed bed reactor. The sorbent was prepared by wet method in which MnO was impregnated onto a standard 7-A1203. The sorbent was regenerated at 600°C. The regenerating gas was a mixture of N2, H2 and steam in various proportions. The N2-H2-steam mixture resulted in a complete regeneration of the sorbent. The composition of the reactor off-gas varied according to the regenerating gas composition. Under suitable conditions the concentration of H2S in the reactor off-gas was high enough for use to produce elemental sulfur.
📜 SIMILAR VOLUMES
## Abstract ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 100 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable v