𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Reinforcement mechanism of polyester-fiber-reinforced rubber—A model study

✍ Scribed by Gi Xue; Jack L. Koenig; Donald D. Wheeler; Hatsuo Ishida


Publisher
John Wiley and Sons
Year
1983
Tongue
English
Weight
596 KB
Volume
28
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.


📜 SIMILAR VOLUMES


Study of jute fiber reinforced polyester
✍ A. K. Saha; S. Das; D. Bhatta; B. C. Mitra 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 266 KB 👁 2 views

Cyanoethylation of jute fibers in the form of nonwoven fabric was studied, and these chemically modified fibers were used to make jute-polyester composites. The dynamic mechanical thermal properties of unsaturated polyester resin (cured) and composites of unmodified and chemically modified jute-poly

Mechanical properties of pineapple leaf
✍ L. Uma Devi; S. S. Bhagawan; Sabu Thomas 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 364 KB 👁 2 views

Pineapple leaf fiber (PALF) which is rich in cellulose, relatively inexpensive, and abundantly available has the potential for polymer reinforcement. The present study investigated the tensile, flexural, and impact behavior of PALF-reinforced polyester composites as a function of fiber loading, fibe

Mechanical and water sorption studies of
✍ P. A Sreekumar; Pradeesh Albert; G. Unnikrishnan; Kuruvilla Joseph; Sabu Thomas 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 203 KB 👁 2 views

## Abstract Banana fiber, one of the world's most important natural fiber obtained from the bast of the plant __Musa Saptentum Linn,__ is available in plenty in Kerala. Without reinforcement, polyester resins are hard and brittle and cannot be used for structural applications. In the present study,

Crosslinked polyesters from “bisacid A2.
✍ R. S. Lenk 📂 Article 📅 1972 🏛 John Wiley and Sons 🌐 English ⚖ 346 KB 👁 1 views

## Abstract This paper reports the flexural and tensile test results on glass fiber laminates prepared from solutions in styrene of polyesters containing bisacid A2 and from standard commercial liquid polyester resins. The results are compared with each other. Suggestions are made for differences i