✦ LIBER ✦

Bamboo fiber-reinforced polypropylene composites: A study of the mechanical properties

✍ Scribed by Xiaoya Chen; Qipeng Guo; Yongli Mi

Publisher: John Wiley and Sons
Year: 1998
Tongue: English
Weight: 384 KB
Volume: 69
Category: Article
ISSN: 0021-8995
DOI: 10.1002/(sici)1097-4628(19980906)69:10<1891::aid-app1>3.0.co;2-9

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Short jute fiber-reinforced polypropylen

Short jute fiber-reinforced polypropylene composites: Dynamic mechanical study

✍ A. K. Rana; B. C. Mitra; A. N. Banerjee 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 220 KB 👁 1 views

Short jute fiber-reinforced polypropylene (PP) composites were prepared using a high-speed thermokinetic mixer. A compatibilizer was used to improve the molecular interaction between jute and PP. Both the percent weight fraction of the jute fiber and compatibilizer were varied to study the dynamic m

Effect of needle density on the mechanic

Effect of needle density on the mechanical properties of fiber-reinforced polypropylene composites

✍ T.-M. Wu; C.-B. Lee 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 267 KB 👁 1 views

The partial impregnation textile preform consisting of chopped-strand, long glass fiber and nonwoven polypropylene (PP) has been prepared by needle-punching to improve fiber-matrix distribution before processing. These unconsolidated textile preforms were then preheated and hot-pressed for consolida

Mechanical properties of pineapple leaf

Mechanical properties of pineapple leaf fiber-reinforced polyester composites

✍ L. Uma Devi; S. S. Bhagawan; Sabu Thomas 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 364 KB 👁 1 views

Pineapple leaf fiber (PALF) which is rich in cellulose, relatively inexpensive, and abundantly available has the potential for polymer reinforcement. The present study investigated the tensile, flexural, and impact behavior of PALF-reinforced polyester composites as a function of fiber loading, fibe

Thermal and dynamic mechanical investiga

Thermal and dynamic mechanical investigations on fiber-reinforced polypropylene composites

✍ A. Amash; P. Zugenmaier 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 339 KB 👁 1 views

The thermal behavior and dynamic mechanical properties of isotactic polypropylene (PP) and reactor blend PP/ethylene-propylene copolymer (EPM), reinforced with different amounts of short glass fibers (GF) and/or polyester fibers (PETF), were investigated by differential scanning calorimetry (DSC) an

Mechanical properties and viscoelastic b

Mechanical properties and viscoelastic behavior of basalt fiber-reinforced polypropylene

✍ M. Botev; H. Betchev; D. Bikiaris; C. Panayiotou 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 265 KB 👁 1 views

In the present article, a series of commercial-grade polypropylenes (PP) filled with different contents of short basalt fibers were studied. This composite material presented deterioration of both mechanical characteristics, for example, stress and strain at yield with increasing of the fiber conten

Mechanical properties of ultrahigh-molec

Mechanical properties of ultrahigh-molecular-weight polyethylene fiber-reinforced PE composites

✍ Toshio Ogawa; Hiroaki Mukai; Satoshi Osawa 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 362 KB 👁 2 views

Three types of high-strength polyethylene (PE) fiber-reinforced composite sheets were made by compression molding at the vicinity of melting point of the fiber. Sheet I was molded from only PE fibers. Sheets II and III were prepared by the compression molding of PE fiber with conventional high-and l