Regeneration of working solution in the hydrogen peroxide production process
β Scribed by Hui Shang; Hongjun Zhou; Wenhui Zhang; Kunlin Zhang
- Publisher
- John Wiley and Sons
- Year
- 2011
- Tongue
- English
- Weight
- 140 KB
- Volume
- 89
- Category
- Article
- ISSN
- 0008-4034
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
The regeneration of working solutions is an important procedure during the anthraquinone process for hydrogen peroxide production, which commonly uses activated alumina for this purpose. This study investigated the impact of different factors on regeneration performance using a fixed bed reactor and found that temperature, contact time, and the catalyst's active component were the key factors. Catalysts with higher alkali content improve regeneration performance. The catalysts' binders and the postβtreatment method affect their physical strength, but steam counteracts this due to the reaction of the active component with water.
π SIMILAR VOLUMES
## Abstract Predictions of the βredoxβ and βcomplexβ schemes for the Fe^3+^ catalyzed decomposition of H~2~O~2~ have been compared with published and new experimental data by numerical integratior of the appropriate complete sets of differential equations. Apparent discrepancies for the redox schem
The oxidation of thiol-containing small molecules, peptides, and proteins in the presence of peroxides is of increasing biological and pharmaceutical interest. Although such reactions have been widely studied there does not appear to be a consensus in the literature as to the reaction products forme
## Abstract The reaction of sulfide with hydrogen peroxide in an aqueous solution at pH 9 produces thiosulfate, sulfite, and an unknown sulfur compound as intermediates, and, finally, all sulfides convert to sulfate (Chen and Gupta, __Environ Lett__ 1973, 4, 187β200; Yokosuka et al., __Nihon Kagaku