𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Reforming methanol to electricity in a high temperature PEM fuel cell

✍ Scribed by George Avgouropoulos; Joan Papavasiliou; Maria K. Daletou; Joannis K. Kallitsis; Theophilos Ioannides; Stylianos Neophytides


Publisher
Elsevier Science
Year
2009
Tongue
English
Weight
362 KB
Volume
90
Category
Article
ISSN
0926-3373

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


A Simple and Accurate Method for High-Te
✍ A. A. Kulikovsky; H.-F. Oetjen; Ch. Wannek πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 211 KB

## Abstract A set of basic parameters for any polymer electrolyte membrane fuel cell (PEMFC) includes the Tafel slope __b__ and the exchange current density __j__~\*~ of the cathode catalyst, the oxygen diffusion coefficient __D__~b~ in the cathode gas‐diffusion layer and the cell resistivity __R__

Microblock Ionomers: A New Concept in Hi
✍ Z. Zhu; N. M. Walsby; H. M. Colquhoun; D. Thompsett; E. Petrucco πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 266 KB πŸ‘ 1 views

## Abstract A novel series of polyaromatic ionomers with similar equivalent weights but very different sulphonic acid distributions along the ionomer backbone has been designed and prepared. By synthetically organising the sequence‐distribution so that it consists of fully defined ionic segments (c

Characterisation and Modelling of a High
✍ S. J. Andreasen; J. L. Jespersen; E. Schaltz; S. K. KΓ¦r πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 41 KB

Pages 3: The figure references are not corresponding to the correct figures. In the text (column 1, line 2), "Figure 4" should be "Figure 5", and later (column 1, line 17) "Figure 5" should be "Figure 4".

Chronoamperometric Investigations of the
✍ A. Kamat; A. Huth; O. Klein; S. Scholl πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 358 KB

## Abstract This paper presents investigations into the chronoamperometric experiments performed on polybenzimidazole/phosphoric acid based high temperature polymer electrolyte membrane fuel cells. Electrolyte loadings in the membrane electrode assembly are varied to realise three different degrees