๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Reactive compatibilizer precursors for LDPE/PA6 blends, 1. Ethylene/acrylic acid copolymers

โœ Scribed by Sara Filippi; Valeria Chiono; Giovanni Polacco; Massimo Paci; Liliya I. Minkova; Pierluigi Magagnini

Publisher
John Wiley and Sons
Year
2002
Tongue
English
Weight
685 KB
Volume
203
Category
Article
ISSN
1022-1352

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Reactive Compatibilizer Precursors for L
Reactive Compatibilizer Precursors for LDPE/PA6 Blends, 4
โœ Sara Filippi; Hristo Yordanov; Liliya Minkova; Giovanni Polacco; Marco Talarico ๐Ÿ“‚ Article ๐Ÿ“… 2004 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 542 KB

## Abstract **Summary:** The effectiveness of some thermoplastic elastomers grafted with maleic anhydride (MA) or with glycidyl methacrylate (GMA) as compatibilizer precursors (CPs) for blends of low density polyethylene (LDPE) with polyamideโ€6 (PA) has been studied. The CPs were produced by grafti

Properties of ethyleneโ€“propylene copolym
Properties of ethyleneโ€“propylene copolymer/PA-1010 blends using ethyleneโ€“propylene copolymer-graft-acrylic acid as a compatibilizing agent
โœ Zhang Xiaomin; Whang Dongmei; Yin Zhihui; Yin Jinghua ๐Ÿ“‚ Article ๐Ÿ“… 1996 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 926 KB

## SYNOPSIS T h e modification of ethylene-propylene copolymer (EP) has been accomplished by radical initiators. T h e resulting EP-graft-acrylic acid (EP-g-AA) has been used to obtain ternary PA/EP/EP-g-AA blends by melt mixing. Different blend morphologies were observed by scanning electron micro

Poly(ethylene-graft-ethylene oxide) (PE-
Poly(ethylene-graft-ethylene oxide) (PE-PEO) and poly(ethylene-co-acrylic acid) (PEAA) as compatibilizers in blends of LDPE and polyamide-6
โœ ร…sa Halldรฉn; Bertil Ohlsson; Bengt Wesslรฉn ๐Ÿ“‚ Article ๐Ÿ“… 2000 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 366 KB ๐Ÿ‘ 2 views

In a blend of two immiscible polymers a controlled morphology can be obtained by adding a block or graft copolymer as compatibilizer. In the present work blends of low-density polyethylene (PE) and polyamide-6 (PA-6) were prepared by melt mixing the polymers in a co-rotating, intermeshing twin-screw

Reactive Compatibilization of PBT/EVA Bl
Reactive Compatibilization of PBT/EVA Blends with an Ethylene-Acrylic Acid Copolymer and a Low Molar Mass Bis-Oxazoline
โœ Roberto Scaffaro; Francesco P. La Mantia; Claudia Castronovo ๐Ÿ“‚ Article ๐Ÿ“… 2004 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 334 KB

## Abstract **Summary:** Polyesters and polyolefins form highly incompatible blends with poor properties and gross morphology that hinder any practical applications. In this work, the possibility to compatibilize an incompatible blend of poly(butylene terephthalate) (PBT) with ethylene vinyl acetat