## Abstract **Summary:** Blends of polyamide‐6 (PA6) and low density polyethylene (LDPE) were compatibilized by melt mixing with various polyolefins functionalized with glycidyl methacrylate (GMA), i.e., GMA grafted LDPE (LDPE‐__g__‐GMA), GMA grafted styrene‐ethylene/butylene‐styrene block copolyme
Reactive compatibilization of PA 6/ABS blends by ethylene-acrylate-glycidyl methacrylate copolymer
✍ Scribed by Bofen Huang; Dan Li; Zhiyuan Li; Xiao Li; Weihua Zhou
- Publisher
- John Wiley and Sons
- Year
- 2011
- Tongue
- English
- Weight
- 607 KB
- Volume
- 122
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract High‐density polyethylene (HDPE)/poly(ethylene terephthalate) (PET) blends were prepared by means of melt extrusion with ethylene–butyl acrylate–glycidyl methacrylate terpolymer (EBAGMA) as a reactive compatibilizer. The effects of the EBAGMA and PET contents, recovery temperature, and
## SYNOPSIS T h e modification of ethylene-propylene copolymer (EP) has been accomplished by radical initiators. T h e resulting EP-graft-acrylic acid (EP-g-AA) has been used to obtain ternary PA/EP/EP-g-AA blends by melt mixing. Different blend morphologies were observed by scanning electron micro