✦ LIBER ✦

Reactive compatibilization of blends of poly(2,6-dimethyl-1,4-phenylene ether) and poly(butylene terephthalate)

✍ Scribed by H.A.M van Aert; G.J.M van Steenpaal; L Nelissen; P.J Lemstra; J Liska; C Bailly

Book ID: 108366243
Publisher: Elsevier Science
Year: 2001
Tongue: English
Weight: 483 KB
Volume: 42
Category: Article
ISSN: 0032-3861
DOI: 10.1016/s0032-3861(00)00619-4

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Direct metalation of poly(2,6-dimethyl-1

Direct metalation of poly(2,6-dimethyl-1,4-phenylene ether)

✍ Chalk, A. J. ;Hay, A. S. 📂 Article 📅 1969 🏛 Wiley (John Wiley & Sons) 🌐 English ⚖ 748 KB

In situ preparation of blends of polysty

In situ preparation of blends of polystyrene and poly (2,6-dimethyl-1,4-phenylene ether)

✍ L. Nelissen; E.W. Meijer; P.J. Lemstra 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 451 KB

Reactive compatibilization of poly(butyl

Reactive compatibilization of poly(butylene terephthalate)/low-density polyethylene and poly(butylene terephthalate)/ethylene propylene diene rubber blends with a bismaleimide

✍ H. X. Zhang; D. J. Hourston 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 665 KB

The reactive compatibilization effect of a small molecule, bismaleimide (BMI), on poly(butylene terephthalate) (PBT)/low-density polyethylene (LDPE) and PBT/ethylene propylene diene (EPDM) rubber blends were investigated. All the blends were prepared by melt blending in the mixing chamber of a Haake

Miscibility of poly(2,6-dimethyl-1,4-phe

Miscibility of poly(2,6-dimethyl-1,4-phenylene oxide)/poly(vinyl pyrrolidone) blends

✍ Alejandra Opazo; Ligia Gargallo; Deodato Radić 📂 Article 📅 1991 🏛 Springer 🌐 English ⚖ 343 KB

Morphology and deformation behaviour of

Morphology and deformation behaviour of toughened blends of poly(butylene terephthalate), polycarbonate and poly(phenylene ether)

✍ M.E.J. Dekkers; S.Y. Hobbs; V.H. Watkins 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 950 KB

The preparation of microporous membranes

The preparation of microporous membranes from blends of poly(2,6-dimethyl-1,4-phenylene oxide) and sulfonated poly(2,6-dimethyl-1,4-phenylene oxide)

✍ Jan Schauer; Wolfgang Albrecht; Thomas Weigel 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 301 KB 👁 1 views

Poly(2,6-dimethyl-1,4 -phenylene oxide) (PPO) is a chemically resistant polymer and, therefore, an attractive material for the formation of membranes. However, membranes of unmodified PPO prepared by an immersion precipitation possess very low hydraulic permeabilities at the filtration processes. T