Poly(2,6-dimethyl-1,4 -phenylene oxide) (PPO) is a chemically resistant polymer and, therefore, an attractive material for the formation of membranes. However, membranes of unmodified PPO prepared by an immersion precipitation possess very low hydraulic permeabilities at the filtration processes. T
In situ preparation of blends of polystyrene and poly (2,6-dimethyl-1,4-phenylene ether)
✍ Scribed by L. Nelissen; E.W. Meijer; P.J. Lemstra
- Publisher
- Elsevier Science
- Year
- 1992
- Tongue
- English
- Weight
- 451 KB
- Volume
- 33
- Category
- Article
- ISSN
- 0032-3861
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
Blends of organosilicon polymers with polystyrene, PS, and poly(2,6-dimethyl-1,4-phenylene oxide), PPE, were investigated by transmission electron microscopy and differencial scanning calorimetry. Blends with poly(tetramethylsilphenylenesiloxane), PTMPS, showed a morphology characterized by globular
The chemical reactions occurring during the intumescent process taking place in the combustion of the poly(2,6-dimethyl-1,4-phenylene ether) -high-impact polystyrene blends (PPE-HIPS) are studied in detail through the chemical characterization of the burnt and original material by infrared, pyrolysi
## Abstract Blends of styrene–butadiene–styrene (SBS) or styrene–ethylene/1‐butene–styrene (SEBS) triblock copolymers with a commercial mixture of polystyrene (PS) and poly(2,6‐dimethyl‐1,4‐phenylene oxide) (PPO) were prepared in the melt at different temperatures according to the chemical kind of