✦ LIBER ✦

Raising reliability and precision in measuring temperatures of ferrous metals with immersion thermocouples

✍ Scribed by V. L. Maksimova; V. S. Bogdanov; M. S. Krasnyanskii; G. N. Salomatov

Publisher: Springer US
Year: 1976
Tongue: English
Weight: 179 KB
Volume: 19
Category: Article
ISSN: 0543-1972
DOI: 10.1007/bf00826344

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Experience with the use of thermocouples

Experience with the use of thermocouples for measuring glass temperatures and atmospheres in glass furnaces

✍ V. M. Obukhov 📂 Article 📅 1966 🏛 Springer US 🌐 English ⚖ 346 KB

Factors affecting the reliability of pre

Factors affecting the reliability of precision measurement of liquid helium temperature in a dynamic regulation and stabilization mode

✍ A. G. Demishev; V. Z. Suplin; V. F. Khirnyi; A. F. Ryazantsev; I. Yu. Nemish 📂 Article 📅 1989 🏛 Springer US 🌐 English ⚖ 698 KB

In Situ temperature measurements with th

In Situ temperature measurements with thermocouple probes during laser interstitial thermotherapy (LITT): Quantification and correction of a measurement artifact

✍ Manns, Fabrice; Milne, Peter J.; Gonzalez-Cirre, Xochitl; Denham, David B.; Pare 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 198 KB 👁 2 views

## Background and objective: The purpose of this work was to quantify the magnitude of an artifact induced by stainless steel thermocouple probes in temperature measurements made in situ during experimental laser interstitial thermo-therapy (litt). a procedure for correction of this observational e

Method of calculating the error due to i

Method of calculating the error due to inequality of the temperatures of specimen and thermocouple in measurements with interference-type dilatometers

✍ T. A. Kompan 📂 Article 📅 1986 🏛 Springer US 🌐 English ⚖ 300 KB

The precision of area and height measure

The precision of area and height measurements with flame ionization detectors in temperature-programmed capillary gas chromatography

✍ Jung Hag Park; Abul Hussam; Pascal Couasnon; Peter W. Carr 📂 Article 📅 1987 🏛 Elsevier Science 🌐 English ⚖ 457 KB

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB