✦ LIBER ✦

Method of calculating the error due to inequality of the temperatures of specimen and thermocouple in measurements with interference-type dilatometers

✍ Scribed by T. A. Kompan

Publisher: Springer US
Year: 1986
Tongue: English
Weight: 300 KB
Volume: 29
Category: Article
ISSN: 0543-1972
DOI: 10.1007/bf00863299

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Evaluating errors in calculations of the

Evaluating errors in calculations of the discharge coefficient and discharge due to indirect measurement for a differential manometer

✍ V. G. Patrikeev; A. D. Kozlov; Yu. V. Mamonov; M. M. Frenklakh 📂 Article 📅 1995 🏛 Springer US 🌐 English ⚖ 315 KB

Error in MR volumetric flow measurements

Error in MR volumetric flow measurements due to ordered phase encoding in the presence of flow varying with respiration

✍ Ronald L. Wolf; Nicholas J. Hangiandreou; Joel P. Felmlee; Phillip J. Rossman; P 📂 Article 📅 1995 🏛 John Wiley and Sons 🌐 English ⚖ 653 KB

## Abstract Respiratory ordered phase encoding is often employed in MRI studies to reduce image artifacts due to breathing motion. The purpose of this work was to evaluate error caused by the use of respiratory ordering of phase encoding in MR cine phase‐contrast (CPC) volumetric flow measurements

A study of vacancy characteristics in Al

A study of vacancy characteristics in Al and Al-Cu alloys by the method of measuring the electrical-resistance derivative with respect to temperature

✍ J.S. Netchaev 📂 Article 📅 1978 🏛 Elsevier Science 🌐 English ⚖ 336 KB

Consideration of natural stresses in the

Consideration of natural stresses in the rock massif and the technology of construction with respect to the calculation of underground opening by means of the finite element method : Christov, T; Iliev, S Proc International Symposium on Field Measurements in Rock Mechanics, Zurich, 4–6 April 1977, V2, P905–918. Publ Rotterdam: A A Balkema, 1977

📂 Article 📅 1979 🏛 Elsevier Science 🌐 English ⚖ 109 KB 👁 3 views

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB