✦ LIBER ✦

Properties of polyisocyanurate resins obtained by polymerization of hexamethylene diisocyanate by organotin catalysts

✍ Scribed by Nathan Hakman; Gad Marom; Albert Zilkha

Publisher: Elsevier Science
Year: 1978
Tongue: English
Weight: 275 KB
Volume: 14
Category: Article
ISSN: 0014-3057
DOI: 10.1016/0014-3057(78)90012-5

No coin nor oath required. For personal study only.

✦ Synopsis

AbstractmResults are given for the mechanical, thermal and flammability properties of polyisocyanurate resins obtained from hexamethylene diisocyanate by bis-(tributyltin)-oxide catalysis. It is shown that the mechanical properties of the isocyanurate resins and of their glass fibre-reinforced composites are comparable with those of commercial epoxy and polyester resins. The thermal stability and the flame retardance of the isocyanarate resins are far better than of epoxies or polyesters.

📜 SIMILAR VOLUMES

Oligotrimerization of hexamethylene diis

Oligotrimerization of hexamethylene diisocyanate by organometallic catalysts

✍ S Dabi; A Zilkha 📂 Article 📅 1980 🏛 Elsevier Science 🌐 English ⚖ 226 KB

The oligotrimerization of hexamethylene diisocyanate by tributylin oxide (TBTO), Zr(OBu)4, Ti(OBu),, and Pb-naphthenate was studied. For mild reaction conditions, i.e. weak catalyst (TBTO), low catalyst concentration and temperature, the reaction gave selectively the cyclic trimer (I) and not higher

Polymerization of N-carboxy anhydrides b

Polymerization of N-carboxy anhydrides by organotin catalysts

✍ S. Freireich; D. Gertner; A. Zilkha 📂 Article 📅 1974 🏛 Elsevier Science 🌐 English ⚖ 362 KB

The polymerization was studied in detail using ),-benzyl N-carboxy-L-glutamate anhydride (BGA). Compounds such as tributyltin methoxide, bis(tributyltin)oxide, and N-tributyltin imidazole polymerized BGA while others like dibutyltin dichloride, which are Lewis acids, failed. Polymerization of BGA in

Enhancement of physical properties of re

Enhancement of physical properties of resin restorative materials by laser polymerization

✍ William P. Kelsey III; Richard J. Blankenau; G. Lynn Powell; Wayne W. Barkmeier; 📂 Article 📅 1989 🏛 John Wiley and Sons 🌐 English ⚖ 540 KB

A study was conducted to compare the compressive strength, diametral tensile strength, transverse flexural strength, and flexural modulus of a microfilled and a small particle composite resin restorative material following argon laser and conventional visible light polymerization techniques. All phy

Synthesis and properties of polyurethane

Synthesis and properties of polyurethane/clay nanocomposite by clay modified with polymeric methane diisocyanate

✍ W. J. Seo; Y. T. Sung; S. J. Han; Y. H. Kim; O. H. Ryu; H. S. Lee; W. N. Kim 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 80 KB 👁 2 views

## Abstract A polyurethane (PU)/clay nanocomposite was synthesized from polyol, polymeric 4,4′‐diphenyl methane diisocyanate (PMDI), and modified clay with PMDI. To achieve the modified clay with PMDI, the silanol group of the clay and the NCO group of the PMDI were reacted for 24 h at 50°C to form

Physicochemical properties of poly(allyl

Physicochemical properties of poly(allylammonium acrylate) complexes obtained by radical template polymerization

✍ Piero Cerrai; Giulio D. Guerra; Simona Maltinti; Mario Tricoli; Paolo Giusti; Lu 📂 Article 📅 1994 🏛 John Wiley and Sons 🌐 English ⚖ 387 KB

Polyethylene-montmorillonite nanocomposi

Polyethylene-montmorillonite nanocomposites obtained by in situ polymerization of ethylene with nickel-diimine catalysts

✍ Marcelo Luis Mignoni; Jonathan Vaz Martins Silva; Michèle Oberson de Souza; Raqu 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 348 KB 👁 2 views

Nanocomposites of exfoliated montmorillonite in polyethylene were obtained using a combination of 1,4-bis(2,6-diisopropylphenyl)-acenaphthenediimine-dichloronickel(II), montmorillonite, and methylalumoxane (MAO) or trimethylaluminum (TMA) to polymerize ethylene. The properties of the polymers were s