𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Properties of elongational flow injection-molded polyethylene part 2: Influence of processing parameters

✍ Scribed by E. López Cabarcos; R. K. Bayer; H. G. Zachmann; F. J. Baltá Calleja; W. Meins

Publisher
Society for Plastic Engineers
Year
1989
Tongue
English
Weight
634 KB
Volume
29
Category
Article
ISSN
0032-3888

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Simulation of injection–compression-mold
Simulation of injection–compression-molding process. II. Influence of process characteristics on part shrinkage
✍ Shia Chung Chen; Yung Chung Chen; Hsin Shu Peng 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 335 KB 👁 2 views

A numerical algorithm is developed to simulate the injection-compression molding (ICM) process. A Hele-Shaw fluid-flow model combined with a modified control-volume/finite-element method is implemented to predict the melt-front advancement and the distributions of pressure, temperature, and flow vel

Effect of Processing Parameters on the M
Effect of Processing Parameters on the Mechanical Properties of Injection Molded Thermoplastic Polyolefin (TPO) Cellular Foams
✍ Steven Wong; John W. S. Lee; Hani E. Naguib; Chul B. Park 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 356 KB 👁 1 views

## Abstract In this study, the effects of processing parameters on the mechanical properties of injection molded thermoplastic polyolefin (TPO) foams are investigated. Closed cell TPO foams were prepared by injection molding process. The microstructure of these foamed samples was controlled by care