𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Properties and microstructure of hot isostatically pressed Si3N4

✍ Scribed by O. Yeheskel; Y. Gefen; M. Talianker

Publisher
Elsevier Science
Year
1985
Weight
168 KB
Volume
71
Category
Article
ISSN
0025-5416

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Creep behavior of hot isostatically pres
Creep behavior of hot isostatically pressed graphite
✍ E.G. Zukas; W.V. Green πŸ“‚ Article πŸ“… 1971 πŸ› Elsevier Science 🌐 English βš– 467 KB

Specimens of two commercial graphites were hot-isostatically pressed at 2700Β°C to more than 95 per cent of theoretical density. These were compared in creep to unpressed specimens from the same artifact. The creep curves were similar in shape; strengths were equal, creep ductilities were equal, and

131. Creep behavior of hot isostatically
131. Creep behavior of hot isostatically pressed graphite
✍ E.G Zukas; W.V Green πŸ“‚ Article πŸ“… 1969 πŸ› Elsevier Science 🌐 English βš– 111 KB

are considerably under-estimated. This difficulty must be understood before defect structure calculations can be carried out adequately for graphite. The Morse potential yields a much larger anharmonic coefficient than is deduced from thermal expansion measurements.

High temperature oxidation of hot isosta
High temperature oxidation of hot isostatically pressed nitride materials
✍ M. Desmaison-Brut πŸ“‚ Article πŸ“… 1990 πŸ› John Wiley and Sons 🌐 German βš– 81 KB

Hot isostatic pressing has been applied for the consolidation of four commercially available nitride powders, i.e. titanium, tantalum, zirconium and hafnium nitrides and the reactivity in oxygen of cubic specimens is compared. Two types of behaviour have been recorded: 0 the oxidation of the titani

Mechanical and technological properties
Mechanical and technological properties of vacuum plasma sprayed and hot isostatically pressed Composite materials
✍ Prof. Dr.-Ing. H.-D. Steffens; Mrs. Dr. rer. nat. J. LebkΓΌchner-Neugebauer; Dipl πŸ“‚ Article πŸ“… 1991 πŸ› John Wiley and Sons 🌐 English βš– 632 KB

## Abstract Ti/NiCr20TiAl and NiCoCrALY/IN617 composite materials have been produced by vacuum plasma spraying, Arc‐PVD and hot isostatic pressing. Regarding their mechanical and technological properties they are dependent on the heat treatment during the production process. Therefore optimized str