✦ LIBER ✦

Progress on the Development of a Superconducting Connection for Niobium Cavities

✍ Scribed by Kneisel, P.; Ciovati, G.; Sekutowicz, J.; Turlington, L.

Book ID: 120244127
Publisher: IEEE
Year: 2009
Tongue: English
Weight: 259 KB
Volume: 19
Category: Article
ISSN: 1051-8223
DOI: 10.1109/TASC.2009.2019650

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Beam tests of a superconducting niobium

Beam tests of a superconducting niobium cavity for a heavy ion accelerator

✍ P.H. Ceperley; J. Sokolowski; I. Ben-Zvi; H.F. Glavish; S.S. Hanna 📂 Article 📅 1976 🏛 Elsevier Science ⚖ 189 KB

Improvements of performance on sputter-c

Improvements of performance on sputter-coated niobium films for superconducting cavities by adding a NbN interlayer

✍ Jiankui Hao; Fei Jiao; Datao Xie; Kui Zhao 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 572 KB

Improvement of the polishing treatment f

Improvement of the polishing treatment for niobium surfaces of superconducting cavity resonators

✍ Y. Uzel; K. Schnitzke; N. Krause 📂 Article 📅 1983 🏛 Springer 🌐 English ⚖ 490 KB

Effect of low-temperature baking on the

Effect of low-temperature baking on the radio-frequency properties of niobium superconducting cavities for particle accelerators

✍ Ciovati, Gianluigi 📂 Article 📅 2004 🏛 American Institute of Physics 🌐 English ⚖ 611 KB

Advances in Cryogenic Engineering || Inf

Advances in Cryogenic Engineering || Influence of the RRR of Niobium on the RF Properties of Superconducting Cavities

✍ Kittel, Peter 📂 Article 📅 1998 🏛 Springer US ⚖ 859 KB

On mechanical properties of the supercon

On mechanical properties of the superconducting niobium

✍ A. Zamiri; F. Pourboghrat; H. Jiang; T.R. Bieler; F. Barlat; J. Brem; C. Compton 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 555 KB

The overall mechanical properties of the high purity niobium (RRR) sheets, which are used in fabrication of the superconducting accelerator cavities, were investigated in this study. High purity niobium has a microstructure that leads to a rough surface on the free surfaces after plastic deformation