✦ LIBER ✦

Process optimization in laser surface structuring of alumina

✍ Scribed by Anoop N. Samant; Sameer R. Paital; Narendra B. Dahotre

Publisher: Elsevier Science
Year: 2008
Tongue: English
Weight: 534 KB
Volume: 203
Category: Article
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2007.10.055

No coin nor oath required. For personal study only.

✦ Synopsis

The efficacy of pulsed Nd:YAG laser for the laser surface structuring (dressing) of porous alumina ceramic was optimized using the Taguchi analytical procedure. The laser processing parameters like the pulse width, repetition rate and the scanning speed were evaluated and the factors essential to optimize the interdendritic porosity and grain size were predicted. The analysis of variance (ANOVA) helped to identify the processing parameters that contributed the most to minimize the porosity and maximize the grain size. The pulse repetition rate was the most significant factor in minimizing the interdendritic porosity while the scanning speed played a vital role in increasing the grain size. The Taguchi method could yield a combination of different process parameters that could be used to optimize the microstructural features.

📜 SIMILAR VOLUMES

The structuring of process optimization

✍ James H. Christensen 📂 Article 📅 1970 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 798 KB

Femtosecond laser micro-structuring of a

Femtosecond laser micro-structuring of alumina ceramic

✍ W. Perrie; A. Rushton; M. Gill; P. Fox; W. O’Neill 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 232 KB

Frequency-tripled Nd:YAG laser ablation

Frequency-tripled Nd:YAG laser ablation in laser structuring process

✍ Bin Zhang; K.C. Yung 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 486 KB

With the increasing demand for finer lines/spaces on PCB boards, a new technology-laser structuring-has emerged in recent years. In this research, the frequency-tripled Nd:YAG laser is selected as the laser source in laser structuring; this laser is often used in miniaturization machining. This pape

Laser assisted densification of surface

Laser assisted densification of surface porosity in structural alumina ceramic

✍ Harimkar, S. ;Dahotre, N. B. 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 635 KB

## Abstract Alumina ceramics are extensively used in structural components due to excellent thermal and mechanical properties. The effective utilization of alumina ceramic in these applications necessitates the minimization of inherent processing defects such as porosity. Laser processing can be ef

Analysis of process parameters of laser

Analysis of process parameters of laser structuring with Taguchi method

✍ K. C. Yung; B. Zhang 📂 Article 📅 2010 🏛 Springer 🌐 English ⚖ 606 KB

Electronic structure of alumina surface

✍ L. Turi Nagy; M. Micov; Ľ. Benco; M. Liška; P. Mach; D. Tunega 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 287 KB 👁 2 views

The electronic structure of the 001 and 110 ␣-alumina surfaces was Ž . determined by periodic Hartree᎐Fock method in statically relaxed geometries. Both 001 Ž . and 110 surfaces generate specific surface states into the energy gap. Significant influence of charge-transfer effect on the surface᎐adsor