✦ LIBER ✦

Analysis of process parameters of laser structuring with Taguchi method

✍ Scribed by K. C. Yung; B. Zhang

Publisher: Springer
Year: 2010
Tongue: English
Weight: 606 KB
Volume: 101
Category: Article
ISSN: 1432-0630
DOI: 10.1007/s00339-010-5832-8

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Optimization of squeeze casting process

Optimization of squeeze casting process parameters using Taguchi analysis

✍ P. Vijian; V. P. Arunachalam 📂 Article 📅 2006 🏛 Springer 🌐 English ⚖ 143 KB

Analysis of spinning process parameters

Analysis of spinning process parameters on development of spun-dyed PET yarn using the Taguchi method

✍ Dae Hwan Cho; Youngjin Jeong 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 424 KB

Optimization of wire electrical discharg

Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method

✍ S. S. Mahapatra; Amar Patnaik 📂 Article 📅 2006 🏛 Springer 🌐 English ⚖ 310 KB

Optimization of green sand casting proce

Optimization of green sand casting process parameters by using Taguchi’s method

✍ S. Guharaja; A. Noorul Haq; K. M. Karuppannan 📂 Article 📅 2006 🏛 Springer 🌐 English ⚖ 150 KB

Application of Taguchi methods in the op

Application of Taguchi methods in the optimization of the laser-cutting process

✍ S.C. Tam; Lennie E.N. Lim; K.Y. Quek 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 525 KB

Experimental analysis of the laser milli

Experimental analysis of the laser milling process parameters

✍ S.L. Campanelli; A.D. Ludovico; C. Bonserio; P. Cavalluzzi; M. Cinquepalmi 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 373 KB

The process of laser milling, or laser ablation as it is also known, was developed over the last decade. In conventional milling techniques material is physically removed by a milling tool. In laser milling the material is removed by a laser beam through the layer by layer ablation mechanism. The a