𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Printed short-circuited wideband monopole antenna with band-notched operation

✍ Scribed by Kin-Lu Wong; Liang-Che Chou; Fa-Shian Chang


Publisher
John Wiley and Sons
Year
2005
Tongue
English
Weight
302 KB
Volume
46
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

This paper presents the band‐notched operation of a printed short‐circuited wideband monopole antenna. The notched or rejected band within a wide operating bandwidth is obtained by embedding an inverted U‐shaped slot close to the shorting point of the antenna, where strong excited surface currents in the antenna are usually present. The notched band is controllable by adjusting the lengths of the inner and outer perimeters of the embedded U‐shaped slot. A constructed prototype of the antenna is demonstrated, and a parametric study of the embedded slot used for band‐notched operation is also presented. © 2005 Wiley Periodicals, Inc. Microwave Opt Technol Lett 46: 58–61, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.20900


📜 SIMILAR VOLUMES


Compact printed ultra-wideband slot ante
✍ Saou-Wen Su; Kin-Lu Wong; Fa-Shian Chang 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 123 KB 👁 1 views

## Abstract A compact printed ultra‐wideband (UWB, 3.1–10.6 GHz) circular‐slot antenna with a notched frequency band at 5 GHz is presented. The antenna is a uniplanar structure and occupies a compact area of 25 × 26 mm^2^ only (the side length is less than 27% of the lower edge frequency at 3.1 GHz

Band-notched ultra-wideband planar monop
✍ Chien-Yuan Pan; Kuo-Yung Chiu; Jhih-Hao Duan; Jen-Yea Jan 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 319 KB 👁 1 views

## Abstract This article presents an ultra‐wideband planar monopole antenna with band‐notched characteristics.The proposed antenna consists of a sector monopole and a microstrip feedline with a quarter‐wavelength open‐circuited transmission line (a stub). The open‐circuited stub is connected in par

Printed pentagon monopole antenna with a
✍ Shun-Yun Lin; Kuang-Chih Huang 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 127 KB 👁 1 views

In this study, we propose a design to obtain band-notching characteristics in printed planar monopoles. An ultra-wide band was achieved by means of the beveled upper edge of the rectangular patch with dimension as small as 55 mm 2 . On the other hand, it is necessary to notch certain bands to avoid

Wideband crossed planar monopole antenna
✍ Wang-Sang Lee; Dong-Zo Kim; Jong-Won Yu 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 222 KB 👁 1 views

are about 0.737 dB for the frequency of 2.348 GHz and 1.669 dB for the frequency of 5.075 GHz, and the measured minimum return losses are about 18.169 dB at the frequency of 2.348 GHz and 19.922 dB at the frequency of 5.075 GHz, as compared to the simulated values. A comparison between the measureme

A printed circular-ring monopole antenna
✍ Jin-Xiang Xiao; Mei-Fang Wang; Guo-Jian Li 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 228 KB 👁 1 views

## Abstract A printed circular‐ring monopole antenna with band‐notched feature for ultra‐wideband application has been presented and investigated. The band‐notched characteristic is achieved by attaching a C‐shaped short‐circuited stub. Experimental results show that the proposed antenna meets the

Dual band-notched ultra-wideband monopol
✍ Ching-Hsing Luo; Chien-Ming Lee; Wen-Shan Chen; Chih-Ho Tu; Ying-Zong Juang 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 295 KB 👁 1 views

## Abstract A dual band‐notched monopole antenna with an annular coplanar waveguides feeding structure for ultra‐wideband (UWB) application is proposed, in which the ring in the feeding structure is used to increase the impedance bandwidth, and two quarter‐wavelength tuning stubs inserted into the