𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Printed-circuit filters for wireless dual- and triple-band applications

✍ Scribed by K. Rambabu; Adrian E. C. Tan; Michael Y. W. Chia; Jens Bornemann

Book ID
102516023
Publisher
John Wiley and Sons
Year
2008
Tongue
English
Weight
233 KB
Volume
50
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

Simple dual‐ and triple‐band printed‐circuit filters for wireless applications are presented. By using a single dual‐behavior resonator for each individual band, two transmission zeros between passbands are obtained, thus providing high levels of rejection. Moreover, there is no limit on the ratio of highest to lowest passband. Several measured prototype performances show very good agreement with computations. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 1495–1497, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23408

📜 SIMILAR VOLUMES

Triple-band dual rectangular ring printe
Triple-band dual rectangular ring printed monopole antenna for WLAN/WiMAX applications
✍ Qiu-Yi Zhang; Qing-Xin Chu 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 396 KB 👁 1 views

## Abstract A novel coplanar waveguide‐fed triple‐band antenna with omni directional radiation patters in the azimuth plane is proposed. The proposed antenna consists of two closed rectangular rings monopole and an inverted‐T strip. It can provide three separate impedance bandwidths of 17.5%, range

New broadband dual-printed inverted L-sh
New broadband dual-printed inverted L-shaped monopole antenna for tri-band wireless applications
✍ Qinjiang Rao; Tayeb A. Denidni 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 312 KB 👁 1 views

## Abstract A broadband printed monopole antenna is proposed for digital communication systems (DCS‐1800), personal communication services (PCS1900), and international mobile telecommunication (IMT‐2000) tri‐band mobile devices. The proposed antenna is composed of two inverted L‐shaped monopoles, a

Printed tri-band monopole antenna struct
Printed tri-band monopole antenna structures for wireless applications
✍ R. K. Gupta 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 518 KB

## Abstract This article proposes a novel tri‐band printed monopole antenna structure for wireless applications in GSM, DCS, and wireless local area network applications, IEEE 802.11 industrial, scientific, and medical (ISM) band. The proposed antenna consists of a rectangular patch monopole printe

Dual-band multilayer ceramic microwave b
Dual-band multilayer ceramic microwave bandpass filter for applications in wireless communication
✍ Cheng-Liang Huang; Chung-Lone Pan 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 134 KB

## Abstract A dielectric multilayer dual‐band filter is realized by using a stepped‐impedance resonator (SIR). The input/output ports of the filter are formed with transmission lines directly tapped to the resonators. The admittance matrix for the equivalent circuit of the filter has been derived a

Dual and triple-band PIFA design for WLA
Dual and triple-band PIFA design for WLAN applications
✍ Chow-Yen-Desmond Sim 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 450 KB

## Abstract The design of a dual and triple‐band planar inverted‐F antenna (PIFA) is proposed for WLAN 802.11 a/b/g applications. Dual‐band operation is achieved by simply truncating one of the top rectangular radiating plate's corners, and wide bandwidth for the upper‐band is obtained by applying