𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Press-formability of stainless steel and aluminum clad sheet

✍ Scribed by T. Mori; S. Kurimoto

Publisher
Elsevier Science
Year
1996
Tongue
English
Weight
799 KB
Volume
56
Category
Article
ISSN
0924-0136

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Air bending and springback of stainless
Air bending and springback of stainless steel clad aluminum sheet
✍ K. Yilamu; R. Hino; H. Hamasaki; F. Yoshida πŸ“‚ Article πŸ“… 2010 πŸ› Elsevier Science 🌐 English βš– 872 KB

This paper deals with bending and springback phenomena of a stainless-steel clad aluminum sheet in V-shaped air bending. The aim of this study is to investigate the bending characteristics such as sheet thickness change and the bending angles of the sheet before/after springback. The first part of t

Formability characterisation of aluminum
Formability characterisation of aluminum cladded deep drawing sheets for automotive catalytic converters and simular parts
✍ D. Bauer; M. Wendt-Ginsberg πŸ“‚ Article πŸ“… 1992 πŸ› Elsevier Science 🌐 English βš– 268 KB

Aluminium cladded steel sheets are not resistant to ageing. Therefore, it should be expected that both the mechanical properties and the press performance or ductility of them will be depending on time after skin-pass rolling. Results of investigations over a range of 100 days between skin-pass rol

Pitting of austenitic stainless steel cl
Pitting of austenitic stainless steel clad metals
✍ Dr. K. N. Krishnan; Prof. K. Prasad Rao πŸ“‚ Article πŸ“… 1990 πŸ› John Wiley and Sons 🌐 German βš– 662 KB

Austenitic stainless steel welds with different ferrite contents (4 and 12FN) were obtained by the Submerged Arc Welding (SAW) strip cladding process, and some clads were remelted by TIG.The welds were post weld heat treated (PWHT) at 600,800,1000"C for 1 h. Pitting potentials were measured in 1 N H