New phenoxaphosphine-containing polyimides were synthesized from 10-phenylphenoxaphosphine-2,3,7,8-tetracarboxylic dianhydride 10-oxide (IV) and diamines via polyamic acids in two steps. (IV) was prepared by dehydration of IO-phenylphenoxaphosphine-2,3,7,8-tetracarboxylic acid 10-oxide (!!!) derived
Preparation of phosphorus-containing polymers—XVII. Preparation of polyamides containing phenoxaphosphine rings
✍ Scribed by M. Sato; M. Yokoyama
- Publisher
- Elsevier Science
- Year
- 1979
- Tongue
- English
- Weight
- 268 KB
- Volume
- 15
- Category
- Article
- ISSN
- 0014-3057
No coin nor oath required. For personal study only.
✦ Synopsis
New phenoxaphosphine-containing polyamides were prepared from 2,8-dichloroformyl-10phenylphenoxaphosphine 10-oxide (I!!) and aromatic diamines in DMA by low-temperature solution polycondensation in the presence of triethylamine as acid acceptor. (III) was synthesized by the chlorination of 2,8-dicarboxy-10-phenylphenoxaphosphine 10-oxide derived from 2,8-dimethyl-10-phenylphenoxaphosphine 10-oxide by pyridine-permanganate oxidation. The resulting polyamides had a reduced viscosity of 0.14--0.40 dl/g in DMA or cone. H2SO4 at 30 °. They were soluble in conc. HzSO,~ and some of them dissolved in DMA, DMF and DMSO, but all were insoluble in benzene and formic acid, etc. They had good thermal stability, hardly degrading until a temperature of about 400 ° was reached; they showed resistance to ignition.
📜 SIMILAR VOLUMES
New phosphorus-containing homo-and copolyesters were prepared from 2,8-dihydroxy-5phenyl-5H-dibenzophosphole 5-oxide, bisphenol A and diacid chlorides, and their solubility, thermal stability, flame resistance and photochemical stability were investigated. Most of the polyesters were obtained at rel
Phosphorus-containing polyanhydride-imides were synthesized from N,N-bis(4-carboxyphthalimido)-3,3'-diphenylalkylphosphine oxide, 3,Y-[N, N'-bis(4-carboxyphthalimido)]benzophenone and their mixtures in two steps via the diacetyl derivatives of the bisimide-carboxylic acids. The resulting polymers ha
The reaction of dichloromaleimides with aromatic amines was applied to the preparation of phosphorus-containing polymers, so-called polymaleimide-amines. The phosphorus-containing polymaleimide-amines were synthesized from N,N'-bisdichloromaleimido-3,3'-diphenylalkylphosphine oxides and aromatic dia
Phosphorus-containing polyamide-imides were prepared from N,N'-bis(4-carboxyphthalimido)-3,Y-diphenylalkylphosphine oxide and aromatic diacetamido derivatives by acidolysis; the reaction conditions are discussed. The resulting polymers were fairly soluble in DMA, DMF and conc. H2SO4; the reduced vis